Headers and Turbo Flange DXF Files
- ctorres3120
- 3.5 Star Elite Contributing Member
- Posts: 612
- Joined: Thu Dec 16, 2010 9:00 pm
Headers and Turbo Flange DXF Files
These flanges I had posted the above, but the photo gallery, but I realized I could download them without being a member.
I'll post it in the right place.
I will post 10 groups
Sorry my bad English
Carlos
I'll post it in the right place.
I will post 10 groups
Sorry my bad English
Carlos
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
CorelDrawX4
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
- ctorres3120
- 3.5 Star Elite Contributing Member
- Posts: 612
- Joined: Thu Dec 16, 2010 9:00 pm
Re: Headers and Turbo Flanges
some photos of the flanges
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
CorelDrawX4
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
- ctorres3120
- 3.5 Star Elite Contributing Member
- Posts: 612
- Joined: Thu Dec 16, 2010 9:00 pm
Re: Headers and Turbo Flanges
some photos of the flanges and some DXF file,
when you have other free time, I keep posting
Carlos
when you have other free time, I keep posting
Carlos
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
CorelDrawX4
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
- ctorres3120
- 3.5 Star Elite Contributing Member
- Posts: 612
- Joined: Thu Dec 16, 2010 9:00 pm
Re: Headers and Turbo Flanges
DXF more
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
CorelDrawX4
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
- ctorres3120
- 3.5 Star Elite Contributing Member
- Posts: 612
- Joined: Thu Dec 16, 2010 9:00 pm
Re: Headers and Turbo Flanges
When I have free time I will continue posting other
Carlos
Carlos
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
CorelDrawX4
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
- Gamelord
- 4.5 Star Member
- Posts: 1637
- Joined: Wed Aug 29, 2012 5:17 pm
- Contact:
Re: Headers and Turbo Flanges
That must have taken a long time and ton of work. Thank you for your generosity and for sharing. You are a true asset to the group.
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
-
- 4 Star Member
- Posts: 1472
- Joined: Wed Feb 04, 2009 5:35 pm
Re: Headers and Turbo Flanges
Thanks Carlos, as Gamelord has said a lot of work to share.
Thanks
Murray
Thanks
Murray
-
- 3 Star Member
- Posts: 450
- Joined: Sun Sep 08, 2013 2:17 pm
- Location: Manitoba
Re: Headers and Turbo Flanges
Yes Carlos thank you, a lot of valuable files there!
Jason Lyon
PlasmaCAM DHC2
Advanced DesignEdge
Hypertherm Powermax 1000
Duramax mini torch with Snap n Cut
Everlast PowerMTS 251si
Torturing metal since 2014
PlasmaCAM DHC2
Advanced DesignEdge
Hypertherm Powermax 1000
Duramax mini torch with Snap n Cut
Everlast PowerMTS 251si
Torturing metal since 2014
-
- 3.5 Star Elite Contributing Member
- Posts: 623
- Joined: Sat Aug 25, 2012 8:08 pm
- Location: Edmonton, Alberta Canada
- Contact:
Re: Headers and Turbo Flanges
Thank you for the files
Gary
Gary
4x8 Home made with Precision Plasma LLC. Gantry
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel Draw 8, V Carve Pro
Miller CTS 280 Miller Mig
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel Draw 8, V Carve Pro
Miller CTS 280 Miller Mig
-
- 2.5 Star Elite Contributing Member
- Posts: 149
- Joined: Tue Apr 17, 2012 3:48 pm
- Location: S/W Louisiana
Re: Headers and Turbo Flanges
love the car stuff. thanks for posting
-
- 2.5 Star Elite Contributing Member
- Posts: 161
- Joined: Wed Dec 21, 2011 4:43 pm
Re: Headers and Turbo Flanges
Damn that is a lot of work and nice files thanks a bunch!
-
- 4 Star Member
- Posts: 1402
- Joined: Mon Aug 30, 2010 5:56 am
- Location: Palm Bch Gardens Fl
- Contact:
Re: Headers and Turbo Flanges
DAMMMMMMMMMMMMMM!!!!!!!!!!!!! Thanks Carlos!!!!!!!!!!!!!!!!
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
4 X 8 Precision Plasma
CandCnC electronics
-
- 1.5 Star Member
- Posts: 28
- Joined: Thu Jul 07, 2011 12:14 pm
Re: Headers and Turbo Flanges
- Thanks! - I could have used some of these a couple weeks back..... Drew them from scratch, I am not sure what they went on (Customer Brought in the parts).... but here is the picture of the finished product.
...
...
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- ctorres3120
- 3.5 Star Elite Contributing Member
- Posts: 612
- Joined: Thu Dec 16, 2010 9:00 pm
Re: Headers and Turbo Flanges
Thank you all, here and other files that you can take advantage of them
Carlos
Carlos
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
CorelDrawX4
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
- ctorres3120
- 3.5 Star Elite Contributing Member
- Posts: 612
- Joined: Thu Dec 16, 2010 9:00 pm
Re: Headers and Turbo Flanges
Gradually I'll post more files and greetings to all
Carlos
Carlos
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
CorelDrawX4
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
-
- 4.5 Star Member
- Posts: 1504
- Joined: Fri Jan 18, 2013 3:19 am
Re: Headers and Turbo Flanges
Wow, thanks Carlos.
Maybe one (or more) of those files will help land me a job or two some day.
Keith.
Maybe one (or more) of those files will help land me a job or two some day.
Keith.
2500 x 1500 water table
Powermax 1250 & Duramax torch (because of the new $$$$ync system, will buy Thermal Dynamics next)
LinuxCNC
Sheetcam
Alibre Design 3D solid modelling
Coreldraw 2019
Powermax 1250 & Duramax torch (because of the new $$$$ync system, will buy Thermal Dynamics next)
LinuxCNC
Sheetcam
Alibre Design 3D solid modelling
Coreldraw 2019
- HammerDownJustin
- 3.5 Star Member
- Posts: 613
- Joined: Mon Mar 04, 2013 10:41 pm
- Location: Paradise,Tx
Re: Headers and Turbo Flanges
Thank you very much sir..will download tonight.
Home built 5x10 table CandCNC electronics
Miller 251 Mig
And lots of other cool stuff...
Miller 251 Mig
And lots of other cool stuff...
-
- 2 Star Member
- Posts: 88
- Joined: Wed Aug 19, 2009 9:59 am
Re: Headers and Turbo Flanges
Gracias por la contribucion
-
- 2.5 Star Member
- Posts: 155
- Joined: Sat May 03, 2014 3:24 pm
Re: Headers and Turbo Flanges
Thanks for the files!
Any chance you have a GN downpipe flange pattern?
Any chance you have a GN downpipe flange pattern?
- ctorres3120
- 3.5 Star Elite Contributing Member
- Posts: 612
- Joined: Thu Dec 16, 2010 9:00 pm
Re: Headers and Turbo Flanges
no I have not cut one for GN, when cut one will share the file
Carlos
Carlos
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
CorelDrawX4
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
-
- 2.5 Star Member
- Posts: 155
- Joined: Sat May 03, 2014 3:24 pm
Re: Headers and Turbo Flanges
You rock!
-
- 1/2 Star Member
- Posts: 7
- Joined: Mon Mar 25, 2013 8:00 pm
- Location: SCOTLAND
- Contact:
Re: Headers and Turbo Flanges
Gear Post & Drawings, Thanks
-
- 2.5 Star Member
- Posts: 171
- Joined: Sun Aug 21, 2011 3:32 am
Re: Headers and Turbo Flanges
Wow thanks for sharing very nice. Oh and your cut pieces look very nice to well done. Can I ask how/what sort of cnc set up you have? Plasma, laser, water jet? Thanks again...
-
- 2.5 Star Member
- Posts: 229
- Joined: Sat Apr 26, 2014 7:56 pm
Re: Headers and Turbo Flanges
Nice! Thanks! Don't See the Oldsmobile stuff often!
- ctorres3120
- 3.5 Star Elite Contributing Member
- Posts: 612
- Joined: Thu Dec 16, 2010 9:00 pm
Re: Headers and Turbo Flanges
here is the Oldsmobile
Carlos
Carlos
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
CorelDrawX4
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn