Dragonfly
- SeanP
- 4 Star Member
- Posts: 950
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Dragonfly
I made up this file today from a 3d dragonfly shared on here, it worked out really well, I cut it out of 2mm at 330mm wide.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
-
- 4 Star Member
- Posts: 1402
- Joined: Mon Aug 30, 2010 5:56 am
- Location: Palm Bch Gardens Fl
- Contact:
Re: Dragonfly
Very nice, thanks for the share!!.
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
4 X 8 Precision Plasma
CandCnC electronics
-
- 2 Star Member
- Posts: 68
- Joined: Tue Jan 28, 2014 3:20 am
- Location: South Africa
Re: Dragonfly
great file, thanks for the share
Pat
Pat
- Oldsarge
- 3.5 Star Member
- Posts: 636
- Joined: Tue Feb 22, 2011 10:12 am
- Location: Lacey, WA
Re: Dragonfly
Really nice work, been using a lot of bugs lately.. Thanks!
Oldsarge
Oldsarge
6x12 Home Built Table
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"
- Craig
- 3.5 Star Member
- Posts: 628
- Joined: Mon Dec 24, 2012 3:43 pm
Re: Dragonfly
Thanks for the share Sean, my wife loves Dragonfly's I think I will make her one for her birthday. And on a side you are one lucky guy to live in one of the most beautiful counties in the world, everyone should get to ride the "Ring of Kerry".
Craig Johnson
Craig Johnson
Craig Johnson
-
- 4.5 Star Member
- Posts: 1504
- Joined: Fri Jan 18, 2013 3:19 am
Re: Dragonfly
Thanks very much Sean, that's a nice looking dragonfly.
Keith.
Keith.
2500 x 1500 water table
Powermax 1250 & Duramax torch (because of the new $$$$ync system, will buy Thermal Dynamics next)
LinuxCNC
Sheetcam
Alibre Design 3D solid modelling
Coreldraw 2019
Powermax 1250 & Duramax torch (because of the new $$$$ync system, will buy Thermal Dynamics next)
LinuxCNC
Sheetcam
Alibre Design 3D solid modelling
Coreldraw 2019
-
- 2 Star Member
- Posts: 84
- Joined: Tue Nov 29, 2011 7:25 am
Re: Dragonfly
Thanks for the file, but I only see a top view of the silholette ? Would like to cut a 3-d one for a friend ?
Thanks Ray
Thanks Ray
-
- 4.5 Star Member
- Posts: 1504
- Joined: Fri Jan 18, 2013 3:19 am
Re: Dragonfly
As Sean mentioned in his opening post, it's a file that has been shared on here.
Try a search for Dragonfly and it should come up.
Keith.
Try a search for Dragonfly and it should come up.
Keith.
2500 x 1500 water table
Powermax 1250 & Duramax torch (because of the new $$$$ync system, will buy Thermal Dynamics next)
LinuxCNC
Sheetcam
Alibre Design 3D solid modelling
Coreldraw 2019
Powermax 1250 & Duramax torch (because of the new $$$$ync system, will buy Thermal Dynamics next)
LinuxCNC
Sheetcam
Alibre Design 3D solid modelling
Coreldraw 2019
-
- 2 Star Member
- Posts: 84
- Joined: Tue Nov 29, 2011 7:25 am
Re: Dragonfly
Yes, I found the file, but it's only a 5 piece file. Not the complete 3 D one like Sean has posted ? Would like to cut the file as seen in the post. If not I'll print it and scan it and trace it, or at least try. I need the practice at tracing. :>)
Thanks Ray
Thanks Ray
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2647
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Dragonfly
I think this is the same dragonfly in the post above, looks right.
Larry
Larry
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- SeanP
- 4 Star Member
- Posts: 950
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: Dragonfly
That's the one larry, thanks, sorry I meant to get back to this one.
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7818
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Dragonfly
This may help some it a animation of assembly for the dragonfly.
https://www.youtube.com/watch?v=mn9iK9RS4xQ
https://www.youtube.com/watch?v=mn9iK9RS4xQ
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 1 Star Member
- Posts: 17
- Joined: Mon Mar 10, 2014 6:21 am
Re: Dragonfly
Thanks for sharing.I have quite a few customers after one of these just have not had the time to draw one.Thanks again.
- trtilton61
- 2 Star Member
- Posts: 63
- Joined: Mon Jul 15, 2013 4:45 pm
Re: Dragonfly
Thanks for the file.
Precision Plasma HDSE-4x8
CandCNC Bladerunner dragon cut
Hypertherm 65
Mach3
sheetcam
CandCNC Bladerunner dragon cut
Hypertherm 65
Mach3
sheetcam
-
- 2 Star Member
- Posts: 68
- Joined: Sun Oct 30, 2016 8:46 pm
Re: Dragonfly
The animation assembly appears to be a different puzzle. Does anyone know where to find assembly instructions for the dxf posted here ?
-
- 2.5 Star Member
- Posts: 194
- Joined: Sun Feb 26, 2012 1:42 pm
Re: Dragonfly
if i remember, i will take a couple of pics of one at my shop tomorrow to check you started , its pretty easy once you get a good look
-
- 1/2 Star Member
- Posts: 8
- Joined: Tue Nov 01, 2016 8:37 am
- Location: Athens Tn
Re: Dragonfly
That's cool, I made one about 2 years ago.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here