Tom has been posting dxf files for awhile now and I am just setting up my table so I decided to try one of his files as my first artsy test cut. This is his Pirate Skull piece. It opened fine in Autocad and Sheetcam and imported to Mach 3 with no issues. I use layers for inside and outside cuts so I can apply different tools to them as per my training at LDR so the only changes I made were to put things on proper layers.
Thanks Tom, Enjoy the fruits of your labor.
Pirate Skull
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1670
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Pirate Skull
- Attachments
-
- Pirate skull.JPG (124.27 KiB) Viewed 1517 times
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 2.5 Star Member
- Posts: 210
- Joined: Sun Mar 17, 2013 9:14 am
Re: Pirate Skull
Everything with the LDR working out ok? Those cuts look good.
- tomloewen
- 2.5 Star Elite Contributing Member
- Posts: 246
- Joined: Mon Mar 03, 2014 1:46 pm
- Location: Alberta Canada
Re: Pirate Skull
Wow Dennis that looks great, thanks for the post.tnbndr wrote:Tom has been posting dxf files for awhile now and I am just setting up my table so I decided to try one of his files as my first artsy test cut. This is his Pirate Skull piece. It opened fine in Autocad and Sheetcam and imported to Mach 3 with no issues. I use layers for inside and outside cuts so I can apply different tools to them as per my training at LDR so the only changes I made were to put things on proper layers.
Thanks Tom, Enjoy the fruits of your labor.
Now that I see how the end result looks, I see something I forgot to do. That long cutout that runs parallel with the rim of his hat, I was going to join it back up in a couple places to give the piece more straight. I think I'll delete the dxf file and re-post.
Thanks again Dennis, you've made my day!
- captdick
- 2 Star Elite Contributing Member
- Posts: 68
- Joined: Mon Dec 21, 2009 11:13 am
- Location: Lodi, Wisconsin
Re: Pirate Skull
Looks like you have got things going great--Talk soon
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1670
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Pirate Skull
@762, yes am quite pleased so far. Setup following Dan's training has gone better than expected.Everything with the LDR working out ok? Those cuts look good
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7801
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Pirate Skull
HI Tom
I looked back through your post a found many files you have contributed but not the pirate skull I hope you re-post as you said here.
Thanks Tom
I looked back through your post a found many files you have contributed but not the pirate skull I hope you re-post as you said here.
Thanks Tom
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- tomloewen
- 2.5 Star Elite Contributing Member
- Posts: 246
- Joined: Mon Mar 03, 2014 1:46 pm
- Location: Alberta Canada
Re: Pirate Skull
yep, its there now.acourtjester wrote:HI Tom
I looked back through your post a found many files you have contributed but not the pirate skull I hope you re-post as you said here.
Thanks Tom