Drops
-
- 1.5 Star Member
- Posts: 28
- Joined: Wed Oct 05, 2011 10:40 pm
- Location: Portland, Oregon
- Contact:
Drops
When I first joined, someone made the comment, "That's creative, but what will you do with the drops?" ....and this is what I came up with. This sculpture is titled, "It's In Your Hand". http://www.columbian.com/news/2014/jul/ ... -festival/
Thanks to all of the Plasma Spider members. I am truly inspired to see everyone's work.
Thanks to all of the Plasma Spider members. I am truly inspired to see everyone's work.
- Attachments
-
- It's In Your Hand 2014 raw.jpg (139.7 KiB) Viewed 3413 times
Tom & Bonnie Jackson
Real Mechanical, Inc.
http://www.OregonCNC.com
Like us on Facebook https://www.facebook.com/RealMechanicalInc
Real Mechanical, Inc.
http://www.OregonCNC.com
Like us on Facebook https://www.facebook.com/RealMechanicalInc
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2648
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Drops
Great piece of work! Glad you won, that was a stiff contest lots of good pieces.
Larry
Larry
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1670
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Drops
Nice Work. Congrats on the win, that is always great confirmation for an artist.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
- Oldsarge
- 3.5 Star Member
- Posts: 636
- Joined: Tue Feb 22, 2011 10:12 am
- Location: Lacey, WA
Re: Drops
Great work! Recycled art takes a lot of talent, and you've got it! Congrats on the win!
Oldsarge
Oldsarge
6x12 Home Built Table
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"
-
- 4 Star Member
- Posts: 1402
- Joined: Mon Aug 30, 2010 5:56 am
- Location: Palm Bch Gardens Fl
- Contact:
-
- 1.5 Star Member
- Posts: 28
- Joined: Wed Oct 05, 2011 10:40 pm
- Location: Portland, Oregon
- Contact:
Re: Drops
Thanks a lot, Craig. Your 3d work definitely inspired me to look at metal art beyond 2d. I have always admired your attention to detail.Craig wrote:Beautiful piece and congrats on the win. Craig Johnson
Tom & Bonnie Jackson
Real Mechanical, Inc.
http://www.OregonCNC.com
Like us on Facebook https://www.facebook.com/RealMechanicalInc
Real Mechanical, Inc.
http://www.OregonCNC.com
Like us on Facebook https://www.facebook.com/RealMechanicalInc
-
- 1.5 Star Member
- Posts: 28
- Joined: Wed Oct 05, 2011 10:40 pm
- Location: Portland, Oregon
- Contact:
Re: Drops
Thanks, Larry! It was great to see my work draw so many smiles.Larry83301 wrote:Great piece of work! Glad you won, that was a stiff contest lots of good pieces. :D :D :D
Larry
Tom & Bonnie Jackson
Real Mechanical, Inc.
http://www.OregonCNC.com
Like us on Facebook https://www.facebook.com/RealMechanicalInc
Real Mechanical, Inc.
http://www.OregonCNC.com
Like us on Facebook https://www.facebook.com/RealMechanicalInc
-
- 1.5 Star Member
- Posts: 28
- Joined: Wed Oct 05, 2011 10:40 pm
- Location: Portland, Oregon
- Contact:
Re: Drops
Thanks, "tnbdr". I agree.tnbndr wrote:Nice Work. Congrats on the win, that is always great confirmation for an artist.
Tom & Bonnie Jackson
Real Mechanical, Inc.
http://www.OregonCNC.com
Like us on Facebook https://www.facebook.com/RealMechanicalInc
Real Mechanical, Inc.
http://www.OregonCNC.com
Like us on Facebook https://www.facebook.com/RealMechanicalInc
-
- 1.5 Star Member
- Posts: 28
- Joined: Wed Oct 05, 2011 10:40 pm
- Location: Portland, Oregon
- Contact:
Re: Drops
Thanks, Oldsarge! And congratulations on your win! I see you are enjoying your new tool, and putting out some nice work. Are you located in PNW?Oldsarge wrote:Great work! Recycled art takes a lot of talent, and you've got it! Congrats on the win!
Oldsarge
Tom & Bonnie Jackson
Real Mechanical, Inc.
http://www.OregonCNC.com
Like us on Facebook https://www.facebook.com/RealMechanicalInc
Real Mechanical, Inc.
http://www.OregonCNC.com
Like us on Facebook https://www.facebook.com/RealMechanicalInc
-
- 1.5 Star Member
- Posts: 28
- Joined: Wed Oct 05, 2011 10:40 pm
- Location: Portland, Oregon
- Contact:
Re: Drops
Thanks, 34chev! I always said I needed an hand...LOL34chev wrote:That is amazing.
Tom & Bonnie Jackson
Real Mechanical, Inc.
http://www.OregonCNC.com
Like us on Facebook https://www.facebook.com/RealMechanicalInc
Real Mechanical, Inc.
http://www.OregonCNC.com
Like us on Facebook https://www.facebook.com/RealMechanicalInc
-
- 1.5 Star Member
- Posts: 28
- Joined: Wed Oct 05, 2011 10:40 pm
- Location: Portland, Oregon
- Contact:
Re: Drops
Thanks, Mark. One of the best things about selling a piece is that I get to make something else now...hopefully as good! LOLhacnwac wrote:very cool. It takes a different kind of skill to do 3d sculptures and it looks like you got it. Can't wait to see what's next.
Mark
Tom & Bonnie Jackson
Real Mechanical, Inc.
http://www.OregonCNC.com
Like us on Facebook https://www.facebook.com/RealMechanicalInc
Real Mechanical, Inc.
http://www.OregonCNC.com
Like us on Facebook https://www.facebook.com/RealMechanicalInc
-
- 1.5 Star Member
- Posts: 28
- Joined: Wed Oct 05, 2011 10:40 pm
- Location: Portland, Oregon
- Contact:
Re: Drops
Thanks!Largemouthlou wrote:Very nice!!!!!!!!
Tom & Bonnie Jackson
Real Mechanical, Inc.
http://www.OregonCNC.com
Like us on Facebook https://www.facebook.com/RealMechanicalInc
Real Mechanical, Inc.
http://www.OregonCNC.com
Like us on Facebook https://www.facebook.com/RealMechanicalInc
- Oldsarge
- 3.5 Star Member
- Posts: 636
- Joined: Tue Feb 22, 2011 10:12 am
- Location: Lacey, WA
Re: Drops
realmechanical wrote:Thanks, Oldsarge! And congratulations on your win! I see you are enjoying your new tool, and putting out some nice work. Are you located in PNW?Oldsarge wrote:Great work! Recycled art takes a lot of talent, and you've got it! Congrats on the win!
Oldsarge
Yes neighbor, just up the road in Lacey/Olympia! Congratulations again!
Oldsarge
6x12 Home Built Table
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"
-
- 3.5 Star Member
- Posts: 566
- Joined: Wed Sep 19, 2012 6:43 am
Re: Drops
Unreal for sure!
- modelaratrod
- 2 Star Member
- Posts: 86
- Joined: Tue Jul 23, 2013 12:41 pm
- Location: Colorado
Re: Drops
Did you start with a round bar frame?
5x10 Torchmate 2 w/AVHC
Hypertherm PM85 w/ machine & hand torch.
Hypertherm PM85 w/ machine & hand torch.