More Plate Marker Art
- Oldsarge
- 3.5 Star Member
- Posts: 636
- Joined: Tue Feb 22, 2011 10:12 am
- Location: Lacey, WA
More Plate Marker Art
#
Last edited by Oldsarge on Fri Mar 27, 2015 7:21 pm, edited 1 time in total.
6x12 Home Built Table
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"
-
- 2 Star Member
- Posts: 72
- Joined: Sun Oct 20, 2013 3:24 pm
Re: More Plate Marker Art
you continue to impress, ,great work
-
- 3.5 Star Elite Contributing Member
- Posts: 689
- Joined: Fri Aug 15, 2008 6:22 pm
- Location: Tenino,WA
Re: More Plate Marker Art
I went over to Mikes shop this morning to use his planishing hammer he won from Baileigh in a contest on this forum. I watched him convert this the coloring book page to a file that could be etched and the process was fairly quick and I could not have done it in ten years! He is as good on the computer as he is with his metal work! Also saw a rose he made yesterday and is not quite finished with but if you guys bug him enough he will put up a picture of it I'm sure.
plain ol Bill
Hypertherm 1250
Duramax machine torch
Corel Draw X6
Sheetcam
Mach3
5 x 10 self built table
Lots of ineptitude
Hypertherm 1250
Duramax machine torch
Corel Draw X6
Sheetcam
Mach3
5 x 10 self built table
Lots of ineptitude
-
- 2.5 Star Member
- Posts: 209
- Joined: Mon Jan 13, 2014 10:37 am
- Location: Boronia, Melbourne, Australia
Re: More Plate Marker Art
I like it. Awesome idea!
Home built 3400 x 1400mm (11 and a bit X a bit over 4.5 feet)
Hypertherm Powermax 45
CandCNC Bladerunner IV
Some air dryer off the internet
Another water seperator I found unused on a shelf
Refrigerated air dryer
Hypertherm Powermax 45
CandCNC Bladerunner IV
Some air dryer off the internet
Another water seperator I found unused on a shelf
Refrigerated air dryer
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1671
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: More Plate Marker Art
Very nice.
I have been experimenting with my scribe also. I'll post in a separate post though.
I have been experimenting with my scribe also. I'll post in a separate post though.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
- Nacs Fab
- 3 Star Member
- Posts: 328
- Joined: Tue Dec 04, 2012 4:11 pm
- Location: Columbia, MO
Re: More Plate Marker Art
Looks real good Sarge! I watched the video and noticed the plate you were marking had a slight bow to it. Did this happen during the engraving process? If so, how do you control your depth of cut on the marker if there is some warpage without any type of height control.
Shop Droids Plasmabot 3.0 DIY 4x8 with water table
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
- Metal Storm
- 2.5 Star Member
- Posts: 198
- Joined: Tue Nov 27, 2012 1:28 am
- Location: Arizona
Re: More Plate Marker Art
yes! how! how do u do this. I have got to get going on this. it seems the more I do the more I learn and the less time I have. and I cant quit the day job doh!Nacs Fab wrote:Looks real good Sarge! I watched the video and noticed the plate you were marking had a slight bow to it. Did this happen during the engraving process? If so, how do you control your depth of cut on the marker if there is some warpage without any type of height control.
- GoingCustom
- 3.5 Star Elite Contributing Member
- Posts: 577
- Joined: Wed Nov 10, 2010 2:53 pm
- Contact:
Re: More Plate Marker Art
That came out great! Looking forward to seeing how you finish it!
- East German
- 4 Star Elite Contributing Member
- Posts: 586
- Joined: Sat Jan 05, 2013 8:21 am
- Location: Stapelburg Germany
Re: More Plate Marker Art
Very nice
Regards Peter
Regards Peter
Sorry for my language! The last English class was in 1982.
Homemade CNC Plasma-Watertable
MyPlasmCNC
Hypertherm Powermax 85
Machine Torch
Hypertherm Powermax 1100
Machine Torch
Homemade CNC Plasma-Watertable
MyPlasmCNC
Hypertherm Powermax 85
Machine Torch
Hypertherm Powermax 1100
Machine Torch
-
- 2.5 Star Member
- Posts: 215
- Joined: Wed Oct 24, 2012 10:29 am
- Location: Auburn, AL
- Contact:
Re: More Plate Marker Art
My guess on depth of cut. The depth is controlled by air pressure. The scriber will ride up (to some degree) over a hump. It is not a fixed height.
Lets see if I'm right.
Lets see if I'm right.
Precision Plasma 4x8 v-rail
C&CNC dragon cut 620
Hypertherm Powermax 45
Auburn, AL
www.facebook.com/decorativemetalworks
C&CNC dragon cut 620
Hypertherm Powermax 45
Auburn, AL
www.facebook.com/decorativemetalworks
-
- 2.5 Star Elite Contributing Member
- Posts: 215
- Joined: Thu Jul 18, 2013 3:05 pm
Re: More Plate Marker Art
Just curious, what program did you use to convert this? It turned out great.