Experimenting with Plate Marker
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1670
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Experimenting with Plate Marker
Had created the text part years ago and never did anyting with it. Now that I have a table with a plate marker I finally decided how to finish it.
I used machinists blue dye over the cards to get some color into the engraving and then ground the surface so it was shiny. Doesn't show well in the pics.
I used machinists blue dye over the cards to get some color into the engraving and then ground the surface so it was shiny. Doesn't show well in the pics.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7801
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Experimenting with Plate Marker
That is really neat great to see the different projects that are posted here Thanks
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1670
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Experimenting with Plate Marker
Here is a better shot of the card engraving.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 2 Star Member
- Posts: 82
- Joined: Wed Aug 07, 2013 12:42 pm
- Location: Huntsville, Texas
Re: Experimenting with Plate Marker
Pretty Slick
-
- 2 Star Member
- Posts: 51
- Joined: Tue Oct 06, 2009 7:52 pm
- Location: Northern NY
Re: Experimenting with Plate Marker
Very nice! Did you get your engraver from Dan or did you add your own???
Jerry
Jerry
CandCNC Electronic
Hypertherm Powermax1000
Mach 3
Sheetcam
CorelDrawx5
LDR 4X8 table
Hypertherm Powermax1000
Mach 3
Sheetcam
CorelDrawx5
LDR 4X8 table
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1670
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Experimenting with Plate Marker
Gogitter, I bought it with the table from LDR.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
- SeanP
- 4 Star Member
- Posts: 950
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: Experimenting with Plate Marker
Fantastic detail there! and looks very accurate, what dimensions is the card? would love to try setting up a scriber one day.
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1670
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Experimenting with Plate Marker
The cards are about 5"x8" each.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
- GoingCustom
- 3.5 Star Elite Contributing Member
- Posts: 577
- Joined: Wed Nov 10, 2010 2:53 pm
- Contact:
Re: Experimenting with Plate Marker
That's awesome! I can't wait to get my table from LDR!
- Nacs Fab
- 3 Star Member
- Posts: 328
- Joined: Tue Dec 04, 2012 4:11 pm
- Location: Columbia, MO
Re: Experimenting with Plate Marker
Very Nice! Can you tell us what brand the engraver is on your machine?
Shop Droids Plasmabot 3.0 DIY 4x8 with water table
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
- ColoradoWayne
- 2.5 Star Member
- Posts: 249
- Joined: Fri Dec 06, 2013 4:48 pm
- Location: Colorado Springs, CO
Re: Experimenting with Plate Marker
That looks great! Great attention to detail!
I too bought a table from Dan - last January. Been getting into it a lot since late May. Love it - great table. I had a steep learning curve because I had never done anything remotely close to this before. I bought the spindle, but haven't taken the time to play with it yet - still learning how to do the plasma thing.
I too bought a table from Dan - last January. Been getting into it a lot since late May. Love it - great table. I had a steep learning curve because I had never done anything remotely close to this before. I bought the spindle, but haven't taken the time to play with it yet - still learning how to do the plasma thing.
Wayne
LDR Motion Systems 4 x 4 water table
Hypertherm Powermax 65
LDR Motion Systems 4 x 4 water table
Hypertherm Powermax 65
-
- 2 Star Member
- Posts: 72
- Joined: Sun Oct 20, 2013 3:24 pm
Re: Experimenting with Plate Marker
Great work