Bob Marley

nvmetalseller · Post by **nvmetalseller** » Fri Jan 23, 2015 2:53 pm

Made this for a friend of mine who really likes his music. Hope you all enjoy it!

Post by **harrymorley** » Fri Jan 23, 2015 3:24 pm

great file..looks really nice. Thanks for sharing

gs123 · Post by **gs123** » Fri Jan 23, 2015 3:32 pm

looks real good. good job.

cbrown · Post by **cbrown** » Fri Jan 23, 2015 4:26 pm

Very nice, thank you for sharing!

Post by **HammerDownJustin** » Tue Jan 27, 2015 3:34 am

That came out great and thank you

Post by **Zippo** » Thu Jan 29, 2015 3:23 am

Thanks for posting

Post by **ben de lappe** » Thu Jan 29, 2015 10:56 am

Thanks for sharing
Ben

bigjondrags · Post by **bigjondrags** » Sun Feb 01, 2015 12:47 pm

that looks sick! with the three colors!!

ryansito · Post by **ryansito** » Sun Feb 01, 2015 2:02 pm

thanks for sharing I will post my pic when I cut one out. thanks again love it

DezertBlingMoto · Post by **DezertBlingMoto** » Sun Feb 01, 2015 2:30 pm

could this file be compressed ? I keep opening in it on torchmate CAD an it shuts it down automatically . Could there be something wrong with the CAD program?

Post by **Larry83301** » Sun Feb 01, 2015 3:00 pm

DezertBlingMoto wrote:could this file be compressed ? I keep opening in it on torchmate CAD an it shuts it down automatically . Could there be something wrong with the CAD program?

Not sure if it's the file, came down OK for me. I resaved it in ACAD 14, try it and see if that works for you, OK.

Larry

DezertBlingMoto · Post by **DezertBlingMoto** » Tue Feb 03, 2015 11:10 pm

Larry83301 wrote:
DezertBlingMoto wrote:could this file be compressed ? I keep opening in it on torchmate CAD an it shuts it down automatically . Could there be something wrong with the CAD program?
Not sure if it's the file, came down OK for me. I resaved it in ACAD 14, try it and see if that works for you, OK.

Larry

Will give it a shot thank you Larry!!!

nvmetalseller · Post by **nvmetalseller** » Tue Feb 10, 2015 5:27 pm

DezertBlingMoto wrote:could this file be compressed ? I keep opening in it on torchmate CAD an it shuts it down automatically . Could there be something wrong with the CAD program?

It loaded just fine on my old machine. You did make sure that you had the Orange security flash drive plugged in right?

sion2413 · Post by **sion2413** » Wed Feb 18, 2015 4:07 pm

what paint finish did you use?
it looks awesome

larrycameron44 · Post by **larrycameron44** » Thu Feb 19, 2015 2:51 am

sion2413 wrote:what paint finish did you use?
it looks awesome

I think it is the Dulux Metalcast paint. Designed for shiny metal or chrome. It gives a nice translucent glossy shine .

Larry
NZ

nvmetalseller · Post by **nvmetalseller** » Tue Feb 24, 2015 3:01 pm

sion2413 wrote:what paint finish did you use?
it looks awesome

I used the DupliColor Metalcast paints, I also torched colored the face and outside edges. Make sure you buff it to shiny metal first. Metalcast is an anodized transparent paint. Comes in Red, Green, Blue, Purple, Yellow/Gold, Orange, and Smoke Gray. The Smoke Gray actually has a different additive that makes it to were no paint will stick to it after it dries. So if you paint something like carbon fiber then put clear coat over it it will repel off the Gray and you'll be left with a textured look and feel to it when it dries.

Bob Marley

Bob Marley

Re: Bob Marley

Re: Bob Marley

Re: Bob Marley

Re: Bob Marley

Re: Bob Marley

Re: Bob Marley

Re: Bob Marley

Re: Bob Marley

Re: Bob Marley

Re: Bob Marley

Re: Bob Marley

Re: Bob Marley

Re: Bob Marley

Re: Bob Marley

Re: Bob Marley