Elk Key Holder
-
- 1 Star Member
- Posts: 24
- Joined: Sun Nov 30, 2014 9:54 pm
- Location: Wright, Wyoming
Elk Key Holder
I finish drill the outside 2 holes to 1/4 and the other holes are 5/32
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 3 Star Member
- Posts: 450
- Joined: Sun Sep 08, 2013 2:17 pm
- Location: Manitoba
Re: Elk Key Holder
Here is the dxf.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Jason Lyon
PlasmaCAM DHC2
Advanced DesignEdge
Hypertherm Powermax 1000
Duramax mini torch with Snap n Cut
Everlast PowerMTS 251si
Torturing metal since 2014
PlasmaCAM DHC2
Advanced DesignEdge
Hypertherm Powermax 1000
Duramax mini torch with Snap n Cut
Everlast PowerMTS 251si
Torturing metal since 2014
-
- 1 Star Member
- Posts: 24
- Joined: Sun Nov 30, 2014 9:54 pm
- Location: Wright, Wyoming
Re: Elk Key Holder
I am new to this site, still trying to figure it out. Thank you sir
Travis Harshbarger
Plasmacam DHC
Plasmacam DHC
-
- 3.5 Star Member
- Posts: 548
- Joined: Tue May 25, 2010 11:42 am
Re: Elk Key Holder
Thanks for sharing.
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2648
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Elk Key Holder
Thanks for the file, the elk looks great!
Larry
Larry
-
- 1 Star Member
- Posts: 24
- Joined: Sun Nov 30, 2014 9:54 pm
- Location: Wright, Wyoming
- hdfaster
- 3.5 Star Elite Contributing Member
- Posts: 501
- Joined: Thu Jan 07, 2010 11:38 pm
Re: Elk Key Holder
Great file thanks for sharing it!
- billyeagley
- 3 Star Elite Contributing Member
- Posts: 359
- Joined: Tue Jun 05, 2012 7:11 pm
- Zippo
- 4.5 Star Elite Contributing Member
- Posts: 1709
- Joined: Fri Mar 04, 2011 12:49 pm
- Location: Minnesota Based
Re: Elk Key Holder
Thanks for posting.
-
- 2.5 Star Member
- Posts: 117
- Joined: Fri Mar 07, 2014 12:13 am
Re: Elk Key Holder
Been trying to get my settings right on this for 2 days. Last cut at 160 speed at 40amps with powermax 85 running a fine cut 45amp tip with shield. Wondering what setting you guys are using. thank you and awesome file.
- wilber
- 2.5 Star Member
- Posts: 147
- Joined: Sun May 11, 2014 8:23 am
Re: Elk Key Holder
are you trying to cut it out of 11 gauge? if so speed is about right. For 16 gauge i cut around 300imp at 45amps. I don't have my specs in front of me but i normal use that to get started and dial in from there.
*** DynaTorch Super B 4x8 with a Hypertherm Powermax 65****
-
- 4 Star Member
- Posts: 1402
- Joined: Mon Aug 30, 2010 5:56 am
- Location: Palm Bch Gardens Fl
- Contact:
-
- 2.5 Star Member
- Posts: 117
- Joined: Fri Mar 07, 2014 12:13 am
Re: Elk Key Holder
yes 16g but it seems the faster I go, I get burn back? but I also think I have wrong shield too
-
- 3.5 Star Member
- Posts: 566
- Joined: Wed Sep 19, 2012 6:43 am
Re: Elk Key Holder
Very nice, thank you!
-
- 1/2 Star Member
- Posts: 6
- Joined: Thu Nov 12, 2015 12:15 pm
Re: Elk Key Holder
Nice thank you.
-
- 3 Star Elite Contributing Member
- Posts: 412
- Joined: Thu Jun 25, 2015 4:06 pm
- Contact:
Re: Elk Key Holder
Awesome - Thanks!!
PlasmaCam DHC2
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
-
- 1.5 Star Member
- Posts: 43
- Joined: Wed Oct 28, 2015 3:51 pm
Re: Elk Key Holder
Looks awesome, I like that you didn't use just a plain rectangle for the bar
-
- 2 Star Elite Contributing Member
- Posts: 62
- Joined: Sat Sep 13, 2014 1:32 pm
- Location: Eastern Washington
Re: Elk Key Holder
Thank You
-
- 3 Star Member
- Posts: 376
- Joined: Thu May 28, 2015 8:02 am
- Location: Merritt island fl.
Re: Elk Key Holder
what table r u running ,i cut some 16 ga last night an i had to slow it down to 120 or 130 @40 amps it seams like cold rolled an carbon steel cut differentquadboy wrote:yes 16g but it seems the faster I go, I get burn back? but I also think I have wrong shield too