Hypertherm pm65 hand/machine torch
- trtilton61
- 2 Star Member
- Posts: 63
- Joined: Mon Jul 15, 2013 4:45 pm
Hypertherm pm65 hand/machine torch
I am running the Hypertherm Powermax 65 w/machine torch on my table. Can I change from a machine torch to a hand torch( for hand operations) without changing the voltage divider card.
Precision Plasma HDSE-4x8
CandCNC Bladerunner dragon cut
Hypertherm 65
Mach3
sheetcam
CandCNC Bladerunner dragon cut
Hypertherm 65
Mach3
sheetcam
-
- 3 Star Member
- Posts: 395
- Joined: Sun Jan 02, 2011 11:03 pm
Re: Hypertherm pm65 hand/machine torch
Yes. Just unplug the machine torch from the front, plug in the hand torch, and proceed to cut.
- chasxjs
- 2.5 Star Elite Contributing Member
- Posts: 225
- Joined: Sun Aug 24, 2014 10:50 pm
- Location: Lake Havasu City, Arizona
Re: Hypertherm pm65 hand/machine torch
On my PM45, when I plug in the hand torch it by-passes the CNC connector wiring.
I believe the PM65 is the same. If so you should have no problem.
I believe the PM65 is the same. If so you should have no problem.
Charles
____________________
DIY 5x5 Folding Plasma Table
Hypertherm PM45
Lagun 4 axis CNC Mill
Shopsmith Lathe
Multiple saws, welders, etc.
____________________
DIY 5x5 Folding Plasma Table
Hypertherm PM45
Lagun 4 axis CNC Mill
Shopsmith Lathe
Multiple saws, welders, etc.
-
- 5 Star Elite Contributing Member
- Posts: 3087
- Joined: Mon Jul 20, 2009 11:18 pm
- Location: North Carolina
Re: Hypertherm pm65 hand/machine torch
As stated in previous replies, simply unplug the machine torch, plug in the hand torch.
Jim Colt Hypertherm
Jim Colt Hypertherm
trtilton61 wrote:I am running the Hypertherm Powermax 65 w/machine torch on my table. Can I change from a machine torch to a hand torch( for hand operations) without changing the voltage divider card.