Steelers anniversary present
- GoingCustom
- 3.5 Star Elite Contributing Member
- Posts: 577
- Joined: Wed Nov 10, 2010 2:53 pm
- Contact:
Steelers anniversary present
2 layers and about 2' across. Customer ordered for her husband for an anniversary present. Sorry the last pic is sideways, if you click on it it'll turn upright
- SeanP
- 4 Star Member
- Posts: 950
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: Steelers anniversary present
Great design and superb polishing.....stunning!
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1670
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Steelers anniversary present
Very nice
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
- GoingCustom
- 3.5 Star Elite Contributing Member
- Posts: 577
- Joined: Wed Nov 10, 2010 2:53 pm
- Contact:
Re: Steelers anniversary present
Thanks fellers
-
- 1.5 Star Member
- Posts: 44
- Joined: Tue Aug 17, 2010 2:01 pm
Re: Steelers anniversary present
How do you get the ok to make these logos? I would like to do it but who do you ask?
Ed
Ed
- Craig
- 3.5 Star Member
- Posts: 628
- Joined: Mon Dec 24, 2012 3:43 pm
Re: Steelers anniversary present
Good looking sign Travis, like the girl insert would improve any NFL logo. Craig Johnson
Craig Johnson