12th man pride! my take on it.

Plasma Cutters can be used to make some amazing products & projects. Upload some pictures of projects you've completed using your plasma cutter.
Post Reply
User avatar
conz35
1.5 Star Member
1.5 Star Member
Posts: 48
Joined: Mon Jan 07, 2013 4:54 pm
Location: Yuma, Az and Davenport, Wa
Contact:

12th man pride! my take on it.

Post by conz35 »

Hey guys just wanted to show my 12th man pride and share my seahawk for my mancave! its 21" x 48" and 2" deep.
010.jpg
010.jpg (45.92 KiB) Viewed 1890 times
011.jpg
011.jpg (25.6 KiB) Viewed 1890 times
012.jpg
012.jpg (26.78 KiB) Viewed 1890 times
"Knowledge is knowing that a tomato is a fruit, but Wisdom is knowing not to put it in a fruit salad."
james.davis
4 Star Member
4 Star Member
Posts: 1008
Joined: Mon May 21, 2012 3:58 pm
Location: spanaway wa.

Re: 12th man pride! my take on it.

Post by james.davis »

That looks great!!!!!Nice work.By the way I'm in Spanaway. :)
Jim
abmetal
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 800
Joined: Mon Dec 26, 2011 8:37 pm
Location: Southeast Missouri

Re: 12th man pride! my take on it.

Post by abmetal »

WOW!!!
michmetalman
3.5 Star Member
3.5 Star Member
Posts: 566
Joined: Wed Sep 19, 2012 6:43 am

Re: 12th man pride! my take on it.

Post by michmetalman »

Amazing!
kncmachine
1 Star Member
1 Star Member
Posts: 23
Joined: Fri Oct 25, 2013 1:53 pm
Location: Ellensburg, Washington

Re: 12th man pride! my take on it.

Post by kncmachine »

SWEET!!! GO Hawks from Ellensburg!
Arclight Dynamics, ArcPro 12000 5x10 table
Hypertherm Powermax 65
Mach3
Sheetcam
Inkscape
Gimp
MIFab
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 255
Joined: Tue Apr 16, 2013 8:47 pm

Re: 12th man pride! my take on it.

Post by MIFab »

How sweet ! Where did you get the lighting and how is it mounted ?
User avatar
KeeYaw
2.5 Star Member
2.5 Star Member
Posts: 108
Joined: Tue Sep 24, 2013 5:09 pm

Re: 12th man pride! my take on it.

Post by KeeYaw »

Thats about the ugliest thing I ever saw! The colors are wrong, terrible. I wouldnt display that if you paid me.

I hope ur machine was acting up when it cut this project and accidentally cut that!!??

Hope u have better luck on ur next project!!

Best Reguards,
KeeYaw..........Saints Fan! Buahahahaha!


It looks Great! Excellent Excellent work!
Pulling for Seahawks now! Its yall Superbowl to lose! Good Luck!
User avatar
conz35
1.5 Star Member
1.5 Star Member
Posts: 48
Joined: Mon Jan 07, 2013 4:54 pm
Location: Yuma, Az and Davenport, Wa
Contact:

Re: 12th man pride! my take on it.

Post by conz35 »

ha ha ha, thanks for all the replies guys. I just hope our offense will show up, defense has been stellar.

The leds are the same ones that a bunch of guys are using on here, we buy the 5m rolls of rgb led 5050 waterproof. You can find them on ebay. Pays if you message a seller and ask to become a wholesaler, thats what we did. We mounted them with there self adhesive 3m back and then hot glued them in place. I dont trust the 3m tape thats on them. Seems to be working pretty good, held up fine on all the bar logos and pizza joints, so far no complaints.

Be extemely carefull using them, seems to me that after you start putting them in your art and signs you just cant help to want to LIGHT everything UP!!! ha ha
"Knowledge is knowing that a tomato is a fruit, but Wisdom is knowing not to put it in a fruit salad."
Post Reply

Return to “CNC Plasma Cutter Project Picture Gallery”