I have been using Steel-FX patinas for a few years on CRS to great pleasure. I did these oysters three years ago and can't for the life of me remember how I achieved the greenish colors. I've tried various combinations and timings with the different patinas that I have and cannot replicate it. Any ideas would be helpful.
Patinas which I use (and only ones I had at the time) are: Copper FX, Torch FX, Rust FX, Pewter FX, and Bronze FX (Craftsman Starter pack)
How to achieve greenish colors with Steel-FX
-
- 1/2 Star Member
- Posts: 3
- Joined: Fri Jun 08, 2018 5:03 pm
How to achieve greenish colors with Steel-FX
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 5 Star Elite Contributing Member
- Posts: 2619
- Joined: Thu Jul 24, 2008 11:15 am
Re: How to achieve greenish colors with Steel-FX
I wish I could help but I have no idea, however the finish on all those looks awesome!
- tinspark
- 3.5 Star Elite Contributing Member
- Posts: 661
- Joined: Wed May 30, 2018 4:28 pm
Re: How to achieve greenish colors with Steel-FX
Maybe get ahold of Bill from steel fx. He might have the answer, if you already have not tried that. And send them the picture. I have tried a few of his products in the past, and still have some on hand. His reviews show that he is super responsive, so it might be worth giving that a try..
Looks pretty awesome!!
Looks pretty awesome!!
Doug,
4x4 GoTorch- expanded
Height Control/Advanced DesignEdge
Hypertherm 45XP-
Logan Lathe + myriads of other shop toys
**CAUTION**- "Does Not Play Well With Others"![Smile :)](./images/smilies/icon_e_smile.gif)
4x4 GoTorch- expanded
Height Control/Advanced DesignEdge
Hypertherm 45XP-
Logan Lathe + myriads of other shop toys
**CAUTION**- "Does Not Play Well With Others"
![Smile :)](./images/smilies/icon_e_smile.gif)
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1671
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: How to achieve greenish colors with Steel-FX
Not sure how I missed this post and probably late to the show, but I have found that by applying one color over the other achieves some awesome results.
For instance apply Copper FX and rinse, then apply Black FX and before it goes to black there are all kinds of color variations that appear. When a color appears that you like just rinse to stop the reaction. But be ready, changes can occur fast.
My guess is that Bronze FX or Flame FX over Copper FX may get you a green affect.
For instance apply Copper FX and rinse, then apply Black FX and before it goes to black there are all kinds of color variations that appear. When a color appears that you like just rinse to stop the reaction. But be ready, changes can occur fast.
My guess is that Bronze FX or Flame FX over Copper FX may get you a green affect.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 5 Star Elite Contributing Member
- Posts: 2619
- Joined: Thu Jul 24, 2008 11:15 am
Re: How to achieve greenish colors with Steel-FX
Awesome tip Dennis, thank you
![Like :Like](./images/smilies/icon_new_like.gif)
![Like :Like](./images/smilies/icon_new_like.gif)
![Like :Like](./images/smilies/icon_new_like.gif)
- steelfx
- 4 Star Elite Contributing Member
- Posts: 768
- Joined: Sat Oct 10, 2009 12:09 am
- Location: St. George, Utah
- Contact:
Re: How to achieve greenish colors with Steel-FX
Good advice from tnbnder. The LR image in circled area looks more like COPPER F/X followed by PEWTER F/X. I wonder how close the photo is to the actual color, though.
For easy translucent greens I would use the Metal Dyes or Alcohol Inks.
For opaque greens, like the popular Copper Verdigris, I would use our COPPER VERDE patina.
Bill
For easy translucent greens I would use the Metal Dyes or Alcohol Inks.
For opaque greens, like the popular Copper Verdigris, I would use our COPPER VERDE patina.
Bill