Plasmacam 4x4 to 4x8 on a budget
- 1MORECUT
- 2.5 Star Elite Contributing Member
- Posts: 173
- Joined: Wed Mar 31, 2010 6:58 pm
Re: Plasmacam 4x4 to 4x8 on a budget
Robert, I know someone who bought four 4x4 angles from PlasmaCAM for $1200 shipped ,so they will sell you parts for your table.
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1171
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: Plasmacam 4x4 to 4x8 on a budget
No, no. The whole object of this concept is to just bolt two tables together so that no fabrication is needed. Except that little bit of modifying of 4 of the legs and drilling or slotting 8 holes. Keep it simple! At least that’s how I understand it.SegoMan DeSigns wrote: ↑Thu Feb 22, 2024 12:17 pmHeck a brand new spiffy Iron Worker would pay out on this project as wellacourtjester wrote: ↑Thu Feb 22, 2024 10:51 am the complete DIY build would be easier. Many member out there doing great work with other software![]()
![]()
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3111
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: 4x4 to 4x8 on a budget
I would LOVE to be able to order the two 510 center legs! this would allow me to make a 4x8 table out of two 4x4 tables so easily. They do sell these parts, but I don't THINK they have stacks of legs lying around. I think their tables come from China in the crates and packed as we receive them. I could be wrong. MAYBE they really do just receive boat loads of parts, and assemble the crated tables in Colorado.rdj357 wrote: ↑Thu Feb 22, 2024 8:30 am Have you ever ordered legs from them? I know they are said to sell controllers a la carte even though they are not listed but I've never heard of anyone buying a leg. It's not an unreasonable part to fabricate and of course if they did sell legs and hardware, the 510 center leg and related pieces would be of value if you abandoned the 4x4 times two concept. Buying piecemeal parts and assembling wouldn't really be proving your concept, would it?
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
I THINK they cannibalize ONE DHC2 table in the crate, or one 510 table in the crate for the parts, and continue to pull parts from the "carcass" until all sellable parts have been sold. They may have three or four opened 4x4 and 510 tables in the warehouse, from which they pull these parts, and charge accordingly, such that selling only 1/2 of the table at their retail prices will PAY for the entire table at their cost. If the tables come crated from China, this would make sense.
I really would like to do this with two NEW tables. I just don't know if PlasmaCam will sell me one table WITHOUT a controller or a DE license, and another table WITHOUT a controller, or DE license, or the boom arm, the main harness, the gantry assembly or the carriage assembly. I can move the controller from my 510 table to this "experimental" 4x8 for testing, so I really do not want to spend the money for two MORE DesignEdge licenses that I will never use, as well as all of those other expensive "extra parts."I know it's your hard earned money so I'd definitely look for a good deal or consider selling parts to recover some of the investment but new would definitely look better in the coming pictures!
Joe
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7796
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Plasmacam 4x4 to 4x8 on a budget
Well Joe you are entitled to you opinion, and are so in love with DesignEdge. Personally I may be to much of a rebel, but I hate to be locked into only one type of anything, (except my wife of 55 year)
I like finding out if the grass is greener on the other side. With the 10 tables I built I change things like software and electronics, the table were sold to people who used them and sold parts to many other to copy my table. they may not have been Rolls Royces but they were not Yugos either. You can spend your money how you want and buy what you want, and I will do the same, I am not a follower. you may equal the enjoyment I have with my choices but not exceed them.
![Funny :HaHa](./images/smilies/icon_new_haha.gif)
![Yay :Yay](./images/smilies/icon_new_yay.gif)
![Yay :Yay](./images/smilies/icon_new_yay.gif)
![Funny :HaHa](./images/smilies/icon_new_haha.gif)
![Funny :HaHa](./images/smilies/icon_new_haha.gif)
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- SegoMan DeSigns
- 4 Star Member
- Posts: 848
- Joined: Sat Jan 06, 2018 4:45 pm
Re: Plasmacam 4x4 to 4x8 on a budget
Is a six - pack version available for the more robust user?rdj357 wrote: ↑Thu Feb 22, 2024 1:35 pmNo, no. The whole object of this concept is to just bolt two tables together so that no fabrication is needed. Except that little bit of modifying of 4 of the legs and drilling or slotting 8 holes. Keep it simple! At least that’s how I understand it.SegoMan DeSigns wrote: ↑Thu Feb 22, 2024 12:17 pmHeck a brand new spiffy Iron Worker would pay out on this project as wellacourtjester wrote: ↑Thu Feb 22, 2024 10:51 am the complete DIY build would be easier. Many member out there doing great work with other software![]()
![]()
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1171
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: Plasmacam 4x4 to 4x8 on a budget
![Wow :Wow](./images/smilies/icon_new_wow.gif)
Wow, very interesting! I can see why one would get them from Plasmacam since they're powder coated that pretty blue. The stuff from my metal guy for $4.50 a foot wouldn't be nearly as good!
![Wink :wink:](./images/smilies/icon_e_wink.gif)
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1171
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: Plasmacam 4x4 to 4x8 on a budget
I'll bet they'd double it and give you half off! Can you imagine the possibilities with SIX 4x4 tables bolted together!SegoMan DeSigns wrote: ↑Thu Feb 22, 2024 3:37 pmIs a six - pack version available for the more robust user?rdj357 wrote: ↑Thu Feb 22, 2024 1:35 pmNo, no. The whole object of this concept is to just bolt two tables together so that no fabrication is needed. Except that little bit of modifying of 4 of the legs and drilling or slotting 8 holes. Keep it simple! At least that’s how I understand it.SegoMan DeSigns wrote: ↑Thu Feb 22, 2024 12:17 pm
Heck a brand new spiffy Iron Worker would pay out on this project as well![]()
![]()
![Wow :Wow](./images/smilies/icon_new_wow.gif)
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1171
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: 4x4 to 4x8 on a budget
Huh?? I thought the point was that bolting two 4x4 tables together was simple and outside the box thinking and much easier than putting them together like the 510 is done?
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3111
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Plasmacam 4x4 to 4x8 on a budget
It is simple. the 510 center legs are already made, so getting two of them would be about the same work as bolting the legs together. Still, some modification would be needed, because the ends of the 510 frame that come together at the center are different than the ends that meet the legs. The only advantage of using the 510 legs would be the boom arm mount, but drag chains and a relocated controller would negate that.
This project will be put on hold for a couple of months.
Joe
This project will be put on hold for a couple of months.
Joe
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
- 1MORECUT
- 2.5 Star Elite Contributing Member
- Posts: 173
- Joined: Wed Mar 31, 2010 6:58 pm
Re: Plasmacam 4x4 to 4x8 on a budget
Here's all the parts to make a 4x8 table all you would need is rails and a grate system
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- 1MORECUT
- 2.5 Star Elite Contributing Member
- Posts: 173
- Joined: Wed Mar 31, 2010 6:58 pm
Re: Plasmacam 4x4 to 4x8 on a budget
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3111
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Plasmacam 4x4 to 4x8 on a budget
That is truly awesome! The only thing I would want to see is drag chains on the table in place of the boom arm. You certainly did a scale model of the 510, and I am sure it would work GREAT! Will tis frame accept the standard 4x4 grates? I ask because the grates on a 510 have a different end where they overlap across the center of the table, so the stock 510 grates would work, but they would all have to be cut down in length at the table frame ends.
Joe
Joe
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
- 1MORECUT
- 2.5 Star Elite Contributing Member
- Posts: 173
- Joined: Wed Mar 31, 2010 6:58 pm
Re: Plasmacam 4x4 to 4x8 on a budget
The drag chain will not work with my free standing pipe cutting setup. I will be working on a grate system.
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3111
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Plasmacam 4x4 to 4x8 on a budget
I don't understand. Why can't you put a drag chain on the carriage, on the stationary gantry tube?
Joe
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3111
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Plasmacam 4x4 to 4x8 on a budget
A six pack would be fun, but that would require a gantry double the stock width. That means fully custom parts.
Joe
Joe
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!