Elk camp barrel stove with plasma cut parts
-
- 3.5 Star Elite Contributing Member
- Posts: 363
- Joined: Sun Dec 13, 2009 8:59 pm
- Location: Tacoma, Wa.
Elk camp barrel stove with plasma cut parts
Small barrel stove with plasma cut parts that can be reused if the barrel rusts or burns out over time. The tri-stand is removable and collapsable. When I fired it up to cure the paint I had a lot of smaller wood in it and it took off like a rocket but settled down to a steady burn. The curing paint smoked a bit but no smoke escapes from the stove even with the lid open. There is an ash grate inside so the bottom compartment stays cool compared to the combustion chamber. You can hold your hand under the stove at full burn with no problems. I could use this stove as a chiminea on my deck with no danger of harming the wood. Just a fun project to get rid of some barrels cluttering up the shop. The spark arresting top on the stovepipe was plasma cut also.
-
- 5 Star Elite Contributing Member
- Posts: 2621
- Joined: Thu Jul 24, 2008 11:15 am
Re: Elk camp barrel stove with plasma cut parts
That's awesome, very nicely done!
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1671
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Elk camp barrel stove with plasma cut parts
Nice design!
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7825
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Elk camp barrel stove with plasma cut parts
2 thumbs up on that deal.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 3.5 Star Member
- Posts: 545
- Joined: Thu Dec 05, 2019 11:33 am
Re: Elk camp barrel stove with plasma cut parts
Awesome looking stove! Well done