sawblades center orientation

[14u2cnc]

I have a bunch of old sawblades to cut...and different sizes circle blanks
Wanting my plasma table to recognize the center of the drawing as orientation instead of the bottom left corner...
I am sure its a simple button I am missing to do this.
Help appreciated. Thank you

[djreiswig]

If you use SheetCam, you just center the part on 0,0. Then zero your torch on the center of the blade.
If not, I'm sure there's a similar procedure.

[robertspark]

if you scroll down to step 3 and follow the instructions and select your import origin

https://www.avidcnc.com/support/instruc ... Toolpaths/

https://www.avidcnc.com/support/instruc ... 3_Zoom.png