Something Girly
- Laser Chicks
- 2.5 Star Member
- Posts: 150
- Joined: Wed Jun 27, 2012 5:50 pm
- Location: Red Deer, Alberta
- Contact:
Something Girly
We have cut this out of 18 gauge # 4 finished stainless steel and it is a great wall decoration. Enjoy
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
LASER CHICKS
LASERMANN CUTS LTD
# 2, 6718 Golden West Avenue
Red Deer, Alberta
T4P 1A8
http://www.lasermanncuts.com
LASERMANN CUTS LTD
# 2, 6718 Golden West Avenue
Red Deer, Alberta
T4P 1A8
http://www.lasermanncuts.com
-
- 2 Star Member
- Posts: 85
- Joined: Mon Aug 06, 2012 9:29 pm
Re: Something Girly
Nice file, thank you!
5 x 10 Air bladder water table
Precision plasma HDB gantry
CandCnC 620-4 Bladerunner
Feather touch ohmic plate sensing
Hypertherm Powermax 65
2015 Autocad lt
Sheetcam
Mach 3
Central California
Precision plasma HDB gantry
CandCnC 620-4 Bladerunner
Feather touch ohmic plate sensing
Hypertherm Powermax 65
2015 Autocad lt
Sheetcam
Mach 3
Central California
- Chopper John
- 3 Star Elite Contributing Member
- Posts: 389
- Joined: Mon Aug 24, 2009 10:22 pm
- Location: Crystal Lake, IL
- Contact:
Re: Something Girly
Nice clean file, Thanks!
Chopper John
Mad City Cycles, Inc.
"Every piece of paper has two good sides... Unless you use magic marker then you're f*cked."
Mad City Cycles, Inc.
"Every piece of paper has two good sides... Unless you use magic marker then you're f*cked."
-
- 3.5 Star Member
- Posts: 548
- Joined: Tue May 25, 2010 11:42 am
Re: Something Girly
THanks for sharing.
-
- 4 Star Member
- Posts: 900
- Joined: Thu Sep 03, 2009 10:43 am
Re: Something Girly
NICE, thanks for sharing!
- sewester
- 1 Star Member
- Posts: 12
- Joined: Sat Aug 11, 2012 11:43 pm
- Location: Washington
Re: Something Girly
nice thanks
-
- 2 Star Member
- Posts: 55
- Joined: Thu Apr 08, 2010 3:27 pm
Re: Something Girly
A picture to see what you are going to be downloading.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- Zippo
- 4.5 Star Elite Contributing Member
- Posts: 1709
- Joined: Fri Mar 04, 2011 12:49 pm
- Location: Minnesota Based
Re: Something Girly
Thanks for posting
- ctorres3120
- 3.5 Star Elite Contributing Member
- Posts: 612
- Joined: Thu Dec 16, 2010 9:00 pm
Re: Something Girly
very very nice, Thanks for sharing.
Carlos
Carlos
CorelDrawX4
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
-
- 2.5 Star Member
- Posts: 197
- Joined: Sat Aug 13, 2011 7:56 am
Re: Something Girly
nice file thx xx dikko
-
- 3 Star Member
- Posts: 470
- Joined: Thu Mar 03, 2011 12:06 am
- Location: Maine
Re: Something Girly
Nice! Thank you.
-
- 3 Star Elite Contributing Member
- Posts: 316
- Joined: Sat Oct 08, 2016 12:26 pm