Cutzilla

Questions, information, project pics and more relating to plate markers, engravers, and scribes.
Post Reply
User avatar
Hole Shot Garage
1 Star Member
1 Star Member
Posts: 17
Joined: Thu Mar 19, 2020 10:05 am
Location: Spring City TN

Cutzilla

Post by Hole Shot Garage »

Anybody using the Cutzilla ? Do you like it ? is it user friendly ? It looks pretty complete but there would have to be a calculation i think to allow for the offset of the engraver.. Any input appreciated..
A torch , A welder, duct tape, and zip ties we can find a way to fix it !
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Cutzilla

Post by acourtjester »

YOu may want to look at easyscriber, shown on this site and sold from this site too. Nowhere near the cost or noise.
viewforum.php?f=172
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
User avatar
Hole Shot Garage
1 Star Member
1 Star Member
Posts: 17
Joined: Thu Mar 19, 2020 10:05 am
Location: Spring City TN

Re: Cutzilla

Post by Hole Shot Garage »

Easyscriber will not work on my torch.. been talking to him. That was my first choice .. I have bought the Cutzilla look forward to trying it out..
A torch , A welder, duct tape, and zip ties we can find a way to fix it !
b165203
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Sun Aug 20, 2017 10:05 am

Re: Cutzilla

Post by b165203 »

If you use Sheetcam the offsets are very easy to edit in the plasma with scribe post.
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8598
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Cutzilla

Post by adbuch »

The Cutzilla looks like a quality product. This is a similar concept to the Engraving Attachment I purchased several years ago for my Plasmacam. These air scribes work great, but are indeed noisy.
David

https://cutzilla.weeblysite.com/
Cutzilla.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

btburn
2.5 Star Member
2.5 Star Member
Posts: 205
Joined: Sun Apr 20, 2014 9:38 am

Re: Cutzilla

Post by btburn »

I ordered the CutZilla scriber setup from Josh. I'm impressed, especially for the price. Many scribe setups are more expensive and don't include the scriber. Josh used quality components and it includes the scriber as well. Josh built to my specs for my table (Dynatorch Super Bee) since my M8/M9 voltages were opposite of most. I had to make a bracket, run some wires, run an air line and fiddle with the offsets and that's it. I highly recommend Josh and his CutZilla scriber.
Dynatorch 4x4 SuperBee, Powermax 65, Quincy QT-54, Snap On MM250SL, Thermal Arc Arcmaster 185, Corel Draw X7 and a messy garage.
Post Reply

Return to “Plate Markers, & Air Scribes”