Recycling torchmate eletronics to diy cnc

Share and learn with other DIY members who have built their own plasma tables and accessories.
Post Reply
stompjrkz400
1 Star Member
1 Star Member
Posts: 19
Joined: Fri Feb 12, 2016 7:08 am

Recycling torchmate eletronics to diy cnc

Post by stompjrkz400 »

i have a torchmate 2 table i'm upgrading to candcnc equipment currently

but the torchmate stuff works fine SO i'm wondering if there are any kits that are bare bone where i can put the electronics on a table.

im actually thinking it would be very cool to build a 2x2 setup with a router with the torchmate equipment but every kit i see includes motors and other electronics.

thanks guys!
User avatar
Nacs Fab
3 Star Member
3 Star Member
Posts: 329
Joined: Tue Dec 04, 2012 4:11 pm
Location: Columbia, MO

Re: Recycling torchmate eletronics to diy cnc

Post by Nacs Fab »

Look up Precision Plasma LLC they sell gantry kits. I also think you can buy a kit from BTA Plasma, but ask Matt.
Shop Droids Plasmabot 3.0 DIY 4x8 with water table
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
Post Reply

Return to “DIY Plasma Table & Accessory Discussion Forum”