Rod's Spaceship Scratch Built Plasma Table
-
djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1936
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: Rod's Spaceship Scratch Built Plasma Table
It looks like you have enough space on the din rail to spread the drives out some, and maybe you could add a crossflow fan to the left side of the box to provide some cooling.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
-
Rodw
- 4 Star Member
- Posts: 780
- Joined: Sun Aug 21, 2016 1:49 am
- Location: Brisbane, Australia
- Contact:
Re: Rod's Spaceship Scratch Built Plasma Table
Nah, I had a look, I should be able to orient them side by side so the heat rises up and away instead of heating another drive...
And then I can add a fan right on top as per the manufacturer's recommendation if it happens again.
And then I can add a fan right on top as per the manufacturer's recommendation if it happens again.
