Need help..Cut stops too early

Share and learn with other DIY members who have built their own plasma tables and accessories.
Post Reply
Neima
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Tue Sep 17, 2019 9:39 pm

Need help..Cut stops too early

Post by Neima »

Hi i have problem .. my diy plasma stop torch to early .. and i dont know why.. mach 3 problem ? Setings? Spindle setup.. ? Velocity? Everythings is runing but torch is gone..

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
djreiswig
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1929
Joined: Thu Nov 19, 2015 10:02 pm
Location: SE Nebraska

Re: Need help..

Post by djreiswig »

Looks like your cut height is too high or your feedrate is too fast. It's probably losing the arc.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1929
Joined: Fri Apr 17, 2009 11:48 am

Re: Need help..

Post by weldguy »

djreiswig wrote: Sat Oct 05, 2019 11:04 am Looks like your cut height is too high or your feedrate is too fast. It's probably losing the arc.
+1 on the cut height too high
Neima
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Tue Sep 17, 2019 9:39 pm

Re: Need help..Cut stops too early

Post by Neima »

Problem find ! now everything ok . Problem = My Cw delay spindown setup 1s.. :)
Post Reply

Return to “DIY Plasma Table & Accessory Discussion Forum”