percision plasma/spark robotics

Share and learn with other DIY members who have built their own plasma tables and accessories.
Post Reply
Triple S
1 Star Member
1 Star Member
Posts: 18
Joined: Tue Dec 14, 2021 8:46 am

percision plasma/spark robotics

Post by Triple S »

just wondering if I can get a little advice from you guys , Iwas going to build a 5x10 plasma with plans from precision plasma and use the spark robotics .I have a hypertherm 65 and a very heavy duty table for the base have no problem on the building of the table /gantry but need to know if i will be able to put out a qualty product with this set up ,I have talked to Ron and seems like a good guy any help would be appreciated thak you Steve
BTA Plasma
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 590
Joined: Thu May 12, 2011 4:28 pm

Re: percision plasma/spark robotics

Post by BTA Plasma »

Plasma machine results are only as good as the components, electronics and assembly allows. You are asking about results from the 2 biggest budget system kits available. Results may vary
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: percision plasma/spark robotics

Post by adbuch »

I would tend to agree with BTA.
David
Triple S
1 Star Member
1 Star Member
Posts: 18
Joined: Tue Dec 14, 2021 8:46 am

Re: percision plasma/spark robotics

Post by Triple S »

well Iam new to the site and have been doing a lot of looking around I guess that's what I'm looking for is quality components as i am going to build my own table but do not want cheap crap , sorry if posted in the wrong section as I'm still learning my way around thank you for the help
Joe243672
2 Star Member
2 Star Member
Posts: 72
Joined: Sat Nov 10, 2018 1:41 pm
Location: New Jersey

Re: percision plasma/spark robotics

Post by Joe243672 »

I did precision plasma gantry sold by cutting edge. With the blade runner g5 setup through c and cnc. My machine works awsome
Crossfire Plasma Table
Hypertherm pm 85 cpc rs-485
Miller 252 mig
Miller dynasty 280 Tic/stick
Metabo Mag drill
various Fab equipment
4x8 precision plasma table
G5 c and cnc controls
“ the Shop “ were it all happens
Post Reply

Return to “DIY Plasma Table & Accessory Discussion Forum”