arcforge issac norris

Share and learn with other DIY members who have built their own plasma tables and accessories.
Post Reply
plasmanewbie22
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Tue Apr 18, 2023 10:05 am

arcforge issac norris

Post by plasmanewbie22 »

I bought a used arcforge table. there are two issues the first is i cant figure out how to connect my hypertherm 45xp to it. The control board has a Ethernet port but the hypertherm 45xp requires a cpc cable. The second issue is when I load a file to dry run it. The table limits out on Z axis or goes to home and limits out. Any help would be appreciated.

The information on the board says it was created in Ashville nc by Issac Norris. I guess I was hoping to find him for information.
Post Reply

Return to “DIY Plasma Table & Accessory Discussion Forum”