Everlast 82i cnc connector wiring

Discussion forum for RazorWeld, Everlast, and all other plasma cutters.
Post Reply
Elitemetalfab
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Fri May 15, 2020 2:09 am

Everlast 82i cnc connector wiring

Post by Elitemetalfab »

I recently bought a arclight dynamics 9600 table and have an everlast 82i plasma. The table/computer came with a pwmiia sensor for dthc with 6 wires that i need to pin into the everlast cnc connector, just not sure which pins they need to be attached to. Has anyone used an everlast plama with the pwmIIa sensor? any input or knowledge would be appreciated, neither manual seems to answer the question i have.
weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1929
Joined: Fri Apr 17, 2009 11:48 am

Re: Everlast 82i cnc connector

Post by weldguy »

Not very familiar with what your working with but I believe you need RAV01 or RAV02 card to go with that. Can you post a pic of what your working with and the 6 wires your referring to?
eddieburnsii
1 Star Member
1 Star Member
Posts: 15
Joined: Thu Oct 15, 2009 11:00 am
Location: Gallagher, WV
Contact:

Re: Everlast 82i cnc connector

Post by eddieburnsii »

Has no one figured this combo out yet? I have the same issue with the pwmIIa and a primeweld cut60
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Everlast 82i cnc connector

Post by adbuch »

eddieburnsii wrote: Thu Aug 18, 2022 3:20 pm Has no one figured this combo out yet? I have the same issue with the pwmIIa and a primeweld cut60
I think your best bet would be to contact Arclight for their take on it. It shouldn't be to hard to match up the pins as long as you have copies of the manuals for you cutter and the thc for the table. You may find the attached instructions helpful.
David

https://www.candcnc.net/images/Manuals/PWMII_Update.pdf
thc.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

northcj
1/2 Star Member
1/2 Star Member
Posts: 5
Joined: Sun Jun 21, 2020 11:05 pm

Re: Everlast 82i cnc connector

Post by northcj »

Does this help?
Everlas 82i CNC Pin Diagram.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Polargtx
1.5 Star Elite Contributing Member
1.5 Star Elite Contributing Member
Posts: 30
Joined: Mon Jan 18, 2021 11:58 am

Re: Everlast 82i cnc connector wiring

Post by Polargtx »

I added a second 2-pin cnc connector to the back of my 82i and hooked it direct to work clamp lead and torch lead for true raw arc voltage , the original cnc connector I only use for stop start connections.
IMG_7867.jpeg
IMG_7868.jpeg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Post Reply

Return to “RazorWeld, Everlast, & All Other Plasma Cutters”