non hf plasma cutter

Discussion forum for RazorWeld, Everlast, and all other plasma cutters.
Post Reply
asuratman
2 Star Member
2 Star Member
Posts: 57
Joined: Tue Apr 17, 2018 11:17 am

non hf plasma cutter

Post by asuratman »

I have problem with interference on my cnc plasma due to my plasma cutter Cut 40. Then I plan to purchase non hf plasma cutter. there are 2 types that I can choose to purchase. cheaper one is non hf plasma cutter cut 50 with P80 cutting torch not a blow back type. Another one plasma cutter non hf cut 55 with blow back plasma torch.

Do you think cheaper one with P80 non blowback torch is OK, no interference ? Or I should buy plasma cutter non hf with a blowback torch since a must for non hf ? Thanks.
weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1929
Joined: Fri Apr 17, 2009 11:48 am

Re: non hf plasma cutter

Post by weldguy »

I would go with the blow back plasma setup.
asuratman
2 Star Member
2 Star Member
Posts: 57
Joined: Tue Apr 17, 2018 11:17 am

Re: non hf plasma cutter

Post by asuratman »

thanks for recommendation, I think you are right, a blowback torch is a must for non hf ...
PlasmaDon
1.5 Star Member
1.5 Star Member
Posts: 36
Joined: Wed Nov 15, 2023 6:44 pm

Re: non hf plasma cutter

Post by PlasmaDon »

How do they fire a p80 torch without HF ?
Post Reply

Return to “RazorWeld, Everlast, & All Other Plasma Cutters”