Miller Spectrum 375 Configurations

Discussion forum for Lincoln & Miller plasma cutters
Post Reply
bmwgil
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Tue Sep 15, 2009 1:40 pm

Miller Spectrum 375 Configurations

Post by bmwgil »

I have a PlasmaCAM DHC2. I am cutting with a Miller Spectrum 375. What I am looking for is a complete configurations listing for different metal thickness. The Spectrum 375 is a new cutting machine for me. I had helped a friend whth his machine before buying mine. He was using a Hypertherm 600. What I would like if possible is the configurations for 16, 18, 20 gauge cold rolled steel. Below I have made a list of the settings I need.

Cutting speed (ipm):
Cutting height ( inch):
Height for rapid travel (inch):
Height for pierce (inch):
Time spent piercing hole (sec):
Continue cutting after stop (sec):
Z shift (inch):
Arc voltage shift (inch):
Material thickness (ga): 16, 18, 20.

Thank you for your time. Any help you could give me would be appreciated.
bmwgil
blender2
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Sat Jan 14, 2017 6:33 am

Re: Miller Spectrum 375 Configurations

Post by blender2 »

did you ever get any settings
Post Reply

Return to “Lincoln & Miller Plasma Cutters”