Miller Spectrum 2050 and "One Torch"

Discussion forum for Lincoln & Miller plasma cutters
Post Reply
Sierevello
1/2 Star Member
1/2 Star Member
Posts: 3
Joined: Mon Jul 01, 2019 3:53 pm

Miller Spectrum 2050 and "One Torch"

Post by Sierevello »

Hello,

I would like to use my Miller Spectrum 2050 plasma cutter on a machine. The machine torches for CNC cutting are expensive and scarce. Does anyone know if the Thermal Dynamics "1 Torch" will directly interface to the Spectrum 2050? I have sent Thermal Dynamics 3 messages and have yet to hear back from them.

Thank You,
Steve
weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1901
Joined: Fri Apr 17, 2009 11:48 am

Re: Miller Spectrum 2050 and "One Torch"

Post by weldguy »

Hey Steve

It will not directly interface with your 2050 but I remember a few years back Thermal Dynamics made adapters to allow the 1 Torch to be used on various brands and models of plasma cutters. You may be able to find an adapter. If I remember correcty the machine torch for the Millers back in the day were manufactured by Hypertherm. I would look to Miller for the correct torch if I was you.
cowboyupcustoms89
1 Star Elite Contributing Member
1 Star Elite Contributing Member
Posts: 22
Joined: Thu Jan 21, 2021 10:40 am

Re: Miller Spectrum 2050 and "One Torch"

Post by cowboyupcustoms89 »

Hey Steve

I am currently in the same position and I was wondering what you ever found out on the 2050 machine torch problem I would love to get away from my hand held torch so that I can start using a magnetic breakaway system.
ralphieboy127
1/2 Star Member
1/2 Star Member
Posts: 7
Joined: Sun Dec 16, 2018 9:41 am

Re: Miller Spectrum 2050 and "One Torch"

Post by ralphieboy127 »

Hello,
I have a 2050 too. And I ordered a torch from Larry at Weld mart in Texas, It was a direct fit and works great !!!
consumables for the torch are dirt cheap and could be found anywhere.
Good Luck, Ralph
If you have any questions let me know
Bigsipper
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Tue Jul 20, 2021 2:56 pm

Re: Miller Spectrum 2050 and "One Torch"

Post by Bigsipper »

nvrmd....
Post Reply

Return to “Lincoln & Miller Plasma Cutters”