CandCNC ohmic sensor

CandCNC plasma table components discussion forum
Post Reply
Adamsmetalshop
1/2 Star Member
1/2 Star Member
Posts: 3
Joined: Sat Jan 19, 2019 6:47 pm

CandCNC ohmic sensor

Post by Adamsmetalshop »

How do you wire this ohmic sensor up?
User avatar
djreiswig
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1929
Joined: Thu Nov 19, 2015 10:02 pm
Location: SE Nebraska

Re: CandCNC ohmic sensor

Post by djreiswig »

I recommend you go to the website and download and read the manual for the FT-01.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
tcaudle
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1353
Joined: Tue Feb 28, 2012 6:47 pm

Re: CandCNC ohmic sensor

Post by tcaudle »

Adamsmetalshop wrote: Mon Mar 11, 2019 10:44 pm How do you wire this ohmic sensor up?
FT-01 plugs directly to the Table I/O card . The DTHC manual in the addendum has several pages on how to hook it up to various rev of that card. The FT-01 is not a general purpose Ohmic sensor for use with other systems, and it states that on the product description
Post Reply

Return to “CandCNC Forum”