No Live View

CandCNC plasma table components discussion forum
Post Reply
LuckyWeasel
1/2 Star Member
1/2 Star Member
Posts: 8
Joined: Tue Dec 11, 2018 6:35 am

No Live View

Post by LuckyWeasel »

Artwork imports and looks like it would cut fine with Mach 3 and older sheetcam version. Try the same thing with the files in CandCNC and everything looks fine until I try to pull it up to cut it. At that point there is nothing in the Live view. Missing something simple but haven't found it yet. Thanks for any help. Doug
tcaudle
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1353
Joined: Tue Feb 28, 2012 6:47 pm

Re: No Live View

Post by tcaudle »

It means the Gcode is wrong for LINUXCNC. You need to use the SheetCAM POST for CommandCNC.
Post this on our Support Forum and you get faster responses and file access.
Post Reply

Return to “CandCNC Forum”