Voltage divider setting

CandCNC plasma table components discussion forum
Post Reply
OTHill
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 573
Joined: Fri Jul 20, 2012 12:08 pm

Voltage divider setting

Post by OTHill »

I've searched high and low can't get a direct answer. What is the voltage divider setting for 45xp running candcnc bladerunner.
5x10 table,Precision plasma gantry,Cand CNC electronics,Hypertherm 65 plasma,King lathe and mill,255 lincoln mig welder.Dawson Creek BC. Much modified Fastcut 4x8 plasma table with Ethercut
robertspark
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1805
Joined: Mon Jun 12, 2017 6:43 pm

Re: Voltage divider setting

Post by robertspark »

https://www.google.com/url?q=http://can ... GsFsFOO-Sw


pdf page 16/90 should answer your question.

basically 20:1 or 50:1

the 20:1:is listed as preferred
OTHill
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 573
Joined: Fri Jul 20, 2012 12:08 pm

Re: Voltage divider setting

Post by OTHill »

Thanks robertspark! Than the next question how to wire my hand torch on 45xp for cnc cutting? Preferably a picture as I don't always understand all the modern jargon. I remember doing it on my 65 10 years ago but suppose 45 is different?
5x10 table,Precision plasma gantry,Cand CNC electronics,Hypertherm 65 plasma,King lathe and mill,255 lincoln mig welder.Dawson Creek BC. Much modified Fastcut 4x8 plasma table with Ethercut
User avatar
djreiswig
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1929
Joined: Thu Nov 19, 2015 10:02 pm
Location: SE Nebraska

Re: Voltage divider setting

Post by djreiswig »

Capture.PNG1.PNG

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
Post Reply

Return to “CandCNC Forum”