post processor not processing

CommandCNC related questions, tips and topics can be posted here
Post Reply
Jason@bc
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 209
Joined: Mon May 07, 2018 5:27 pm
Location: Moose Jaw Sask.

post processor not processing

Post by Jason@bc »

Hey all, I'm having trouble with a cut-file on command cnc, when I ran the post processor in sheetcam it said there was an error, but after a couple tries it went through, but it didn't do the peck-pierces that it was supposed to, here is the ngc, wonder if someone can tell me what I'm doing wrong in sheetcam.
Jason@bc
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 209
Joined: Mon May 07, 2018 5:27 pm
Location: Moose Jaw Sask.

Re: post processor not processing

Post by Jason@bc »

here is the ngc file
Attachments
slides for manure spreader.zip
(425 Bytes) Downloaded 62 times
User avatar
WyoGreen
4 Star Member
4 Star Member
Posts: 897
Joined: Tue Mar 04, 2014 8:36 pm
Location: Cheyenne, Wyoming

Re: post processor not processing

Post by WyoGreen »

Here is what was in the file.

(Filename: slides for manure spreader .ngc)
(Post processor: CandCNCPlasmaLLCNC-rev26.scpost)
(Date: 01/21/2019)
G20 (Units: Inches)
F10.0
G90 G40
G64 P0.010 Q0.001 (tracking tolerances set to 0.01)
M68 E0 Q10
(Part: pusher-front for manure spreader)
(Operation: Drill, 0, T2: 85 amp 3/16 steel, 0.0156 inch Deep)
M68 E0 Q900 (Global DTHC ON/OFF is ON )
G4 P.1

There is nothing in there to do any cutting. There have been several posts over on the Sheetcam forum by people having similar problems. If I remember right, there was a corrupted license file causing the trouble. You might do a search over there.

Steve
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
Jason@bc
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 209
Joined: Mon May 07, 2018 5:27 pm
Location: Moose Jaw Sask.

Re: post processor not processing

Post by Jason@bc »

I will look over there then, thanks.
Post Reply

Return to “C&CNC CommandCNC”