-
-
Weekly Free DXF Design
-
Download DXF/SVG
Entryway gate
-
kn612
- 2.5 Star Elite Contributing Member
- Posts: 140
- Joined: Sat Oct 31, 2020 4:44 pm
Entryway gate
My driveway gate. Favorite project so far. Lots of gcode but only one set of hypertherm consumables.
-
acourtjester
- 6 Star Elite Contributing Member
- Posts: 8497
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Entryway gate
WOW super nice, how long did that take to cut both sides. 
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
kn612
- 2.5 Star Elite Contributing Member
- Posts: 140
- Joined: Sat Oct 31, 2020 4:44 pm
Re: Entryway gate
About 15hrs total. Slowed the rapid speed down to 450 on it, didn't want any chance of losing steps. Along with a 3" z clearance height it spent more time moving than cutting. Couldn't even see what it was cutting on the screen from all the rapid lines. The deer panel was 100k+ lines of gcode.
-
tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1716
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Entryway gate
Nice Job!!!
Dennis
ComMarker B6 Galvo MOPA Fiber Laser
Hypertherm PM30 Hand Torch
RolAir 3HP Single Stage 30 Gal
13.8scfm@100psi, 3450RPM
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3, Lightburn
ComMarker B6 Galvo MOPA Fiber Laser
Hypertherm PM30 Hand Torch
RolAir 3HP Single Stage 30 Gal
13.8scfm@100psi, 3450RPM
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3, Lightburn
-
tinspark
- 3.5 Star Elite Contributing Member
- Posts: 801
- Joined: Wed May 30, 2018 4:28 pm
Re: Entryway gate
Agreed on the other guys comments.
Super detail and patience letting that thing cut for almost 2-man days!!
Super detail and patience letting that thing cut for almost 2-man days!!
Doug,
4x4 GoTorch- expanded
Height Control/Advanced DesignEdge
Hypertherm 45XP-
Logan Lathe + myriads of other shop toys
**CAUTION**- "Does Not Play Well With Others"
4x4 GoTorch- expanded
Height Control/Advanced DesignEdge
Hypertherm 45XP-
Logan Lathe + myriads of other shop toys
**CAUTION**- "Does Not Play Well With Others"
-
plasmanewbie
- 5 Star Elite Contributing Member
- Posts: 2895
- Joined: Thu Jul 24, 2008 11:15 am
Re: Entryway gate
Wow, now thats a project to be proud of! Well done, coming home must put a smile on your face every time!
-
adbuch
- 6 Star Elite Contributing Member
- Posts: 11352
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Entryway gate
Very nice job! I'm amazed that you were able to cut all of this with only one set of consumables.
David
David
-
Knick
- 1/2 Star Member
- Posts: 2
- Joined: Sun Nov 19, 2017 12:33 pm
Re: Entryway gate
I am new to this Board, and have never posted before, but I had to after seeing that IMPRESSIVE !!kn612 wrote: Mon May 22, 2023 10:23 am About 15hrs total. Slowed the rapid speed down to 450 on it, didn't want any chance of losing steps. Along with a 3" z clearance height it spent more time moving than cutting. Couldn't even see what it was cutting on the screen from all the rapid lines. The deer panel was 100k+ lines of gcode.
IMG_20230404_193044.jpg
-
welbornmetalworks
- 1 Star Member
- Posts: 11
- Joined: Tue Jul 18, 2023 2:08 pm
- Location: Canyon Lake, CA
- Contact:
Re: Entryway gate
EXCELLENT!kn612 wrote: Mon May 22, 2023 7:24 am My driveway gate. Favorite project so far. Lots of gcode but only one set of hypertherm consumables.
IMG_20230408_004849.jpg
IMG_20230404_225407.jpg
IMG_20230409_162034.jpg
IMG_20230522_060427.jpg
