fire pit

Post by **baker** » Fri Oct 29, 2010 2:32 pm

Here is a fire pit that I made recently. I was very happy with the cut quality on this 3/16" steel, and how it turned out overall. Every piece was plasma cut. I use a Dynatorch table with a Hypertherm 1650.

After paint...

Post by **Scratch** » Fri Oct 29, 2010 4:47 pm

Great idea for a fire pit. How many total pieces is it? Is the main ring one piece? I don't see the seam....

Post by **baker** » Fri Oct 29, 2010 7:16 pm

I believe it was 17 total pieces. Yes the main ring was one piece, the seam was welded and cleaned up to blend with the bends.

Post by **elkriverfab** » Sat Oct 30, 2010 4:30 am

Great fire pit!

I think I will make one like this to put out in the yard.

I love to BBQ over hardwood rather than charcoal, this would be great.

Did you come up with this design?

Very unique with the legs and side pieces.

Post by **Metal Lee** » Sat Oct 30, 2010 12:01 pm

Great Job Baker, looks good.

Post by **Twisted 1** » Sat Oct 30, 2010 12:11 pm

Great job. It looks amazing. If you don't mind could you tell me the dimentions of the squares where the deer are. Thanks

Post by **baker** » Sat Oct 30, 2010 12:45 pm

Thanks for the comments everyone. I made this specifically for and donated it to a hunting and outdoor event in my hometown that raises money for youth programs in the area. It was in the silent auction.

I did come up with the design and did all of the scenes also. Each panel is around 12x15, and the circle that the bucks scenes are in were about 10" diameter.

It also had a removable pole with a swing-over grill and pot-holder, but of course I procrastinated and sent those parts last minute so I never got a picture with it all together!

jcspake · Post by **jcspake** » Wed Dec 14, 2011 10:35 am

will you post the pcm of the squares for the scenes... I can not find them in the square design only round...

Thanks,

JS

GoingCustom · Post by **GoingCustom** » Fri Dec 16, 2011 8:25 pm

craftsmanship looks great! Very clean! And I like the legs and foot rests, nice touch!

reidy01 · Post by **reidy01** » Sat Dec 17, 2011 5:47 am

Just looking at your design it's very nice well done but wouldn't it be a good idea to put some expanede metal in the bottom so the ash would drop out and let air in so it would burn better, I guess it would burn OK more for the ease of cleaning too, just a thought. Ouch that hurt....

pemery · Post by **pemery** » Thu Aug 23, 2012 12:04 pm

do you have a basic template of the ring without the deer for sale???

metalart · Post by **metalart** » Thu Aug 23, 2012 8:09 pm

Nice work, thanks for sharing!

RobertJohnson · Post by **RobertJohnson** » Sat Aug 25, 2012 10:04 am

Great design, thanks for sharing!

Alyssa001 · Post by **Alyssa001** » Thu Jan 08, 2015 2:09 pm

What are the dimensions for the legs?

alickjr · Post by **alickjr** » Tue Jul 09, 2019 11:39 am

The fire pit is super cool do you mind sharing the dxf file too thanks (of course if aint selling)

Post by **ben de lappe** » Wed Jul 17, 2019 8:33 am

alickjr wrote: Tue Jul 09, 2019 11:39 am The fire pit is super cool do you mind sharing the dxf file too thanks (of course if aint selling)

Considering that baker was "Last active:Fri Aug 18, 2017 11:27 am"...you'll likely have it drawn on your own before a reply is received.

Post by **djreiswig** » Wed Jul 17, 2019 10:09 am

Could try shooting him a PM in case he isn't subscribed to this thread.

Zippo · Post by **Zippo** » Sun Jul 21, 2019 4:26 am

Nice job...

mm10000 · Post by **mm10000** » Sun Jun 14, 2020 6:34 am

Hello

Post by **BAR M** » Mon Jun 15, 2020 6:13 pm

Very nice and clean design.

Lilman · Post by **Lilman** » Mon Nov 13, 2023 3:01 pm

Can you share the dxf file?

fire pit

fire pit

Re: fire pit

Re: fire pit

Re: fire pit

Re: fire pit

Re: fire pit

Re: fire pit

Re: fire pit

Re: fire pit

Re: fire pit

Re: fire pit

Re: fire pit

Re: fire pit

Re: fire pit

Re: fire pit

Re: fire pit

Re: fire pit

Re: fire pit

Re: fire pit

Re: fire pit

Re: fire pit