Furniture Sign Project

Plasma Cutters can be used to make some amazing products & projects. Upload some pictures of projects you've completed using your plasma cutter.
Post Reply
User avatar
rdj357
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1157
Joined: Sun Mar 11, 2012 4:40 pm
Location: Tahlequah, OK
Contact:

Furniture Sign Project

Post by rdj357 »

Finished up a furniture store project today. I made and installed the pole sign and the facade. The pole sign is 25' tall, the circle is 10' diameter. The black is the back layer then the white stands 3" in front of that with the 'O' and couch cushion spaced 1.5" in front of that. White lights between the white and black layer and red lights behind the red layer. No pics of it lit yet but the facade is amazing at night!
20180621_131417.jpg
20180621_131417.jpg (124.28 KiB) Viewed 1169 times
FB_IMG_1537293298466.jpg
20181011_122644.jpg
User avatar
WyoGreen
4 Star Member
4 Star Member
Posts: 897
Joined: Tue Mar 04, 2014 8:36 pm
Location: Cheyenne, Wyoming

Re: Furniture Sign Project

Post by WyoGreen »

Very nice. Looks like quite a bit of work went into it. The night time picture is quite nice, congrat's on a job well done.

Steve
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Furniture Sign Project

Post by little blue choo »

Nice job Robert.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
BAR M
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 447
Joined: Thu Jul 11, 2013 8:46 pm
Location: NEW MEXICO

Re: Furniture Sign Project

Post by BAR M »

Very impressive. Well done.
User avatar
dgeorgester
2.5 Star Member
2.5 Star Member
Posts: 127
Joined: Wed Oct 24, 2012 7:20 pm
Location: Halifax, Nova Scotia, Canada

Re: Furniture Sign Project

Post by dgeorgester »

Super nice !!!!
Samson 510
Hypertherm Powermax 85, Lincoln 256
AutoCAD
TrinityFabworks
2.5 Star Member
2.5 Star Member
Posts: 186
Joined: Tue Apr 17, 2018 2:36 pm

Re: Furniture Sign Project

Post by TrinityFabworks »

this looks great
User avatar
rdj357
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1157
Joined: Sun Mar 11, 2012 4:40 pm
Location: Tahlequah, OK
Contact:

Re: Furniture Sign Project

Post by rdj357 »

Thank you all, it was a fun project. I lit it up and am going to add some more white lights. It would look great except it's not nearly as bright as the facade and next to it, looks a little dim - good thing I used a large enough transformer to load it up with some more lights! :-D
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1669
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Furniture Sign Project

Post by tnbndr »

It would look great except it's not nearly as bright as the facade and next to it, looks a little dim
Nice job! I actually think the facade is too bright, looks washed out. I think they should change theirs!!
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
User avatar
rdj357
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1157
Joined: Sun Mar 11, 2012 4:40 pm
Location: Tahlequah, OK
Contact:

Re: Furniture Sign Project

Post by rdj357 »

tnbndr wrote:
It would look great except it's not nearly as bright as the facade and next to it, looks a little dim
Nice job! I actually think the facade is too bright, looks washed out. I think they should change theirs!!
I did that too :-) That pic is one that someone took and posted to Facebook so it's not great quality. I have a better one I'll post that is a better representation of what it looks like. It's killer at night. I want the pole sign to match. :-D
Post Reply

Return to “CNC Plasma Cutter Project Picture Gallery”