I tried my hand at the file I found here for the six sided pit. I changed a couple of things, but I think it turned out excellent. Cut from 3/16” HR.
Just an FYI, the bend angle between the legs and upper panel is 56°.
Six sided fire pit plasma cut from 3/16"
-
- 1.5 Star Member
- Posts: 32
- Joined: Wed May 07, 2014 12:20 am
-
- 4.5 Star Elite Contributing Member
- Posts: 2567
- Joined: Thu Jul 24, 2008 11:15 am
Re: Six sided fire pit
Love it!! Nice job
-
- 1/2 Star Member
- Posts: 6
- Joined: Thu Feb 13, 2020 12:04 pm
Re: Six sided fire pit
Turned out really nice.
What part of AK are you in? I'm in the Fairbanks area.
What part of AK are you in? I'm in the Fairbanks area.
-
- 1/2 Star Member
- Posts: 2
- Joined: Sat May 23, 2020 3:12 pm
Re: Six sided fire pit
What paint did you use on it?
-
- 1.5 Star Member
- Posts: 32
- Joined: Wed May 07, 2014 12:20 am
Re: Six sided fire pit
I was in the Mat-Su for 46 years, we moved to NW Arkansas in 2018.NorthernFX wrote: ↑Wed Apr 22, 2020 11:53 am Turned out really nice.
What part of AK are you in? I'm in the Fairbanks area.
Normally I use Rustoleum high heat, but I can't find it in quart cans now that I have a spray gun so I have been using Krylon high heat from Lowes.
-
- 1/2 Star Member
- Posts: 2
- Joined: Mon Aug 22, 2022 12:35 pm
Re: Six sided fire pit
can you share the file for the 6 sided fire pit
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1669
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Six sided fire pit plasma cut from 3/16"
Nice work.
For others that don't have a brake, you can cut the sides and base as separate items and weld them together. Just a little more welding.
For others that don't have a brake, you can cut the sides and base as separate items and weld them together. Just a little more welding.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 2.5 Star Elite Contributing Member
- Posts: 126
- Joined: Thu Sep 22, 2022 6:03 pm
Re: Six sided fire pit plasma cut from 3/16"
Is this file available on here? Cant seem to find it.
- djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1929
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: Six sided fire pit plasma cut from 3/16"
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)