Bird feeder
-
- 3.5 Star Elite Contributing Member
- Posts: 573
- Joined: Fri Jul 20, 2012 12:08 pm
Bird feeder
Latest bird feeder I put together.
5x10 table,Precision plasma gantry,Cand CNC electronics,Hypertherm 65 plasma,King lathe and mill,255 lincoln mig welder.Dawson Creek BC. Much modified Fastcut 4x8 plasma table with Ethercut
- levesquea
- 2.5 Star Member
- Posts: 118
- Joined: Wed Jul 27, 2011 7:02 pm
- Location: Harrington, Quebec, Canada
Re: Bird feeder
Very well done....congratulations
Plasmacam 4x4
Hypertherm Powermax 45
Everlast power Tig 255
Affinity Designer
Alibre expert
Vectric Aspire 10
Hypertherm Powermax 45
Everlast power Tig 255
Affinity Designer
Alibre expert
Vectric Aspire 10
-
- 6 Star Elite Contributing Member
- Posts: 8629
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Bird feeder
Very nicely done! What sort of finish did you use?
Thanks,
David
Thanks,
David
-
- 5 Star Elite Contributing Member
- Posts: 2605
- Joined: Thu Jul 24, 2008 11:15 am
Re: Bird feeder
Very nice feeder! In such a great spot to enjoy the birds too
- tinspark
- 3.5 Star Elite Contributing Member
- Posts: 655
- Joined: Wed May 30, 2018 4:28 pm
Re: Bird feeder
Looks good,,
What are the chickens eating down in the snow..
What are the chickens eating down in the snow..
Doug,
4x4 GoTorch- expanded
Height Control/Advanced DesignEdge
Hypertherm 45XP-
Logan Lathe + myriads of other shop toys
**CAUTION**- "Does Not Play Well With Others"
4x4 GoTorch- expanded
Height Control/Advanced DesignEdge
Hypertherm 45XP-
Logan Lathe + myriads of other shop toys
**CAUTION**- "Does Not Play Well With Others"
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7784
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Bird feeder
They don't eat much there frozen stiff.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 3.5 Star Elite Contributing Member
- Posts: 573
- Joined: Fri Jul 20, 2012 12:08 pm
Re: Bird feeder
- 24 celsius this morning!! You are correct acourtjester they are frozen stiff. The Red polls just love the canola seed in the feeder. there's 20 at a time feeding there some mornings. The chickens in the snow are easy keepers.
5x10 table,Precision plasma gantry,Cand CNC electronics,Hypertherm 65 plasma,King lathe and mill,255 lincoln mig welder.Dawson Creek BC. Much modified Fastcut 4x8 plasma table with Ethercut
-
- 3 Star Elite Contributing Member
- Posts: 281
- Joined: Mon Oct 14, 2019 1:47 pm
Re: Bird feeder
Hi Canadian! -39 here this morning. I'm in NW Ontario. Love your feeder!
5X10 Shop built table
20x80x32 inch gap lathe
10x40 lathe
10x54 milling machine
2-Miller 255
Miller XMT350MPA
Lincoln squarewave tig 255
12 Ft Durma Brake
20x80x32 inch gap lathe
10x40 lathe
10x54 milling machine
2-Miller 255
Miller XMT350MPA
Lincoln squarewave tig 255
12 Ft Durma Brake
-
- 3.5 Star Elite Contributing Member
- Posts: 573
- Joined: Fri Jul 20, 2012 12:08 pm
Re: Bird feeder
Hi cutnweld! Thanks! Dawson Creek BC here. Hot spot in Canada. Whats up in your shop?
5x10 table,Precision plasma gantry,Cand CNC electronics,Hypertherm 65 plasma,King lathe and mill,255 lincoln mig welder.Dawson Creek BC. Much modified Fastcut 4x8 plasma table with Ethercut
- Scratch
- 3.5 Star Elite Contributing Member
- Posts: 806
- Joined: Tue Sep 01, 2009 9:07 pm
- Location: Hudson,WI
- Contact:
-
- 3.5 Star Elite Contributing Member
- Posts: 573
- Joined: Fri Jul 20, 2012 12:08 pm
Re: Bird feeder
Won't hurt em a bit
They've got iron gizzards
They've got iron gizzards
5x10 table,Precision plasma gantry,Cand CNC electronics,Hypertherm 65 plasma,King lathe and mill,255 lincoln mig welder.Dawson Creek BC. Much modified Fastcut 4x8 plasma table with Ethercut
-
- 3 Star Elite Contributing Member
- Posts: 281
- Joined: Mon Oct 14, 2019 1:47 pm
Re: Bird feeder
The usual. Tractor engine rebuilds, clutch jobs, and of course cutting and welding Currently working on fabbing up a 4x8 fixture table for aiding some upcoming Fab jobs
5X10 Shop built table
20x80x32 inch gap lathe
10x40 lathe
10x54 milling machine
2-Miller 255
Miller XMT350MPA
Lincoln squarewave tig 255
12 Ft Durma Brake
20x80x32 inch gap lathe
10x40 lathe
10x54 milling machine
2-Miller 255
Miller XMT350MPA
Lincoln squarewave tig 255
12 Ft Durma Brake
-
- 3.5 Star Elite Contributing Member
- Posts: 573
- Joined: Fri Jul 20, 2012 12:08 pm
Re: Bird feeder
Sounds great! I'm installing a gas engine in an electric golf cart. As usual I underestimated how much work and expense it would be and overestimated how good it would work when done. GRRR.
5x10 table,Precision plasma gantry,Cand CNC electronics,Hypertherm 65 plasma,King lathe and mill,255 lincoln mig welder.Dawson Creek BC. Much modified Fastcut 4x8 plasma table with Ethercut
-
- 3 Star Elite Contributing Member
- Posts: 448
- Joined: Thu Jul 11, 2013 8:46 pm
- Location: NEW MEXICO
Re: Bird feeder
Very sharp. Thanks.
-
- 5 Star Elite Contributing Member
- Posts: 2605
- Joined: Thu Jul 24, 2008 11:15 am