todays project
-
- 2 Star Member
- Posts: 70
- Joined: Wed May 15, 2019 8:12 am
todays project
Hello Guy's and Gal's, this was my project today made for a National Guardsman, let me know what you think..needs improvement
- djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1936
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: todays project
Looks good to me.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
-
- 5 Star Elite Contributing Member
- Posts: 2605
- Joined: Thu Jul 24, 2008 11:15 am
Re: todays project
Looks great! If the fire gets plenty of air and burns well I would say you've done an outstanding job on the entire design
-
- 3 Star Member
- Posts: 313
- Joined: Tue Jul 28, 2009 11:23 pm
- Location: Weiser, ID
- Contact:
Re: todays project
Looks good man!
- cstroke
- 3 Star Elite Contributing Member
- Posts: 405
- Joined: Thu May 24, 2012 7:45 pm
Re: todays project
My opinion and my opinion only.. Looks great, I like the lettering as it's unique.
Like how it pins together...
Suggestion is putting holes in bottom and across bottom of vertical pieces to let more air in, the more air the smoke tends to rise upwards faster and not waft around..
Over all I like it.
Like how it pins together...
Suggestion is putting holes in bottom and across bottom of vertical pieces to let more air in, the more air the smoke tends to rise upwards faster and not waft around..
Over all I like it.
6’x12’ Dynatorch powermax 85
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.