What do you do about the dust?
-
LWRogers
- 1/2 Star Member
- Posts: 1
- Joined: Sat Mar 19, 2016 2:49 pm
-
little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: What do you do about the dust?
water table and fan makes for much cleaner shop.
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
Bobcat320
- 3 Star Elite Contributing Member
- Posts: 411
- Joined: Thu Jun 25, 2015 4:06 pm
- Contact:
Re: What do you do about the dust?
Dust the shop 3 times a week!
PlasmaCam DHC2
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
-
sawdust1
- 2.5 Star Member
- Posts: 163
- Joined: Tue Apr 19, 2016 10:29 pm
- Location: In the way.
Re: What do you do about the dust?
I built mine as a water table, Incredible difference in dust. I still wear a mask which still gets all rusty red but nothing like using the torch without the water.
home built 4x4 watertable. Qcad, SheetCam and Linuxcnc
Miller 375 Cutmate
Lincoln buzz box and a Miller Mig
KNK MAXX vinyl cutter
The adventure started with a Cricut cutter that I hacked.
Miller 375 Cutmate
Lincoln buzz box and a Miller Mig
KNK MAXX vinyl cutter
The adventure started with a Cricut cutter that I hacked.
