Down Draft My solution

All topics related to smoke evacuation, ventilation, and water tables.
Post Reply
tylerd
2.5 Star Member
2.5 Star Member
Posts: 123
Joined: Fri Jan 20, 2017 3:25 am

Down Draft My solution

Post by tylerd »

I bought a Starlab 4x8 back in 2017, it was water table, I converted it to downdraft, this was an extreme process to say the least, but here it is for better or worse. It is complete, and it works awesome! Table is in a small 2x garage in FL on a canal. Here are the Pics.

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Bulltear 4x8
PN200 Pendant
Linux Command CNC
Hypertherm PM 85
C&CNC Bladerunner Servo
DTHC IV Feather Touch
HyT-Connect DCP-01
Sheetcam Inkscape QCAD
tylerd
2.5 Star Member
2.5 Star Member
Posts: 123
Joined: Fri Jan 20, 2017 3:25 am

Re: Down Draft My solution

Post by tylerd »

Sorry little out of order, the horsie was my first painted project, Thanks for file! for my mother in law back in KC.
Bulltear 4x8
PN200 Pendant
Linux Command CNC
Hypertherm PM 85
C&CNC Bladerunner Servo
DTHC IV Feather Touch
HyT-Connect DCP-01
Sheetcam Inkscape QCAD
tylerd
2.5 Star Member
2.5 Star Member
Posts: 123
Joined: Fri Jan 20, 2017 3:25 am

Re: Down Draft My solution

Post by tylerd »

Beginning got removed for some reason?

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Bulltear 4x8
PN200 Pendant
Linux Command CNC
Hypertherm PM 85
C&CNC Bladerunner Servo
DTHC IV Feather Touch
HyT-Connect DCP-01
Sheetcam Inkscape QCAD
weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1929
Joined: Fri Apr 17, 2009 11:48 am

Re: Down Draft My solution

Post by weldguy »

Very interesting but I don't understand where your exhaust air ends up going?
tylerd
2.5 Star Member
2.5 Star Member
Posts: 123
Joined: Fri Jan 20, 2017 3:25 am

Re: Down Draft My solution

Post by tylerd »

4th picture up from the bottom, it comes up from the trench and out the side of the house...see my ghetto ductwork?
Bulltear 4x8
PN200 Pendant
Linux Command CNC
Hypertherm PM 85
C&CNC Bladerunner Servo
DTHC IV Feather Touch
HyT-Connect DCP-01
Sheetcam Inkscape QCAD
weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1929
Joined: Fri Apr 17, 2009 11:48 am

Re: Down Draft My solution

Post by weldguy »

tylerd wrote: Tue Nov 12, 2019 8:28 am 4th picture up from the bottom, it comes up from the trench and out the side of the house...see my ghetto ductwork?
Ghetto ductwork :HaHa Ah I see it now, interesting setup, you sure put the time in on that one :Like
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Down Draft My solution

Post by acourtjester »

Good thing the exhaust is high on the wall to the raccoons from nesting in there :Sad :HaHa
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
racecar366
1 Star Member
1 Star Member
Posts: 16
Joined: Sat Jan 05, 2019 10:31 am

Re: Down Draft My solution

Post by racecar366 »

what fan did you get and what did it run you ?we have a 4x4 table and are looking at doing the same as you did. looks great
tylerd
2.5 Star Member
2.5 Star Member
Posts: 123
Joined: Fri Jan 20, 2017 3:25 am

Re: Down Draft My solution

Post by tylerd »

It is a Dayton 4TM85, I got it off Ebay for 400 I believe, had minor bend on flange but was straightened easily. Keep looking you will find a deal!
Bulltear 4x8
PN200 Pendant
Linux Command CNC
Hypertherm PM 85
C&CNC Bladerunner Servo
DTHC IV Feather Touch
HyT-Connect DCP-01
Sheetcam Inkscape QCAD
Post Reply

Return to “Water Tables, Ventilation, Air Handling”