Fume dog fume extractor.

All topics related to smoke evacuation, ventilation, and water tables.
Post Reply
constantproject
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Thu Dec 29, 2022 7:17 pm

Fume dog fume extractor.

Post by constantproject »

So I just had a buddy of mine twist my arm into one of these...
FumeDog.PNG
Does anyone have any experience with them?

I am finally going to have A/C in my garage so I didnt want to blow all my conditioned air outside but with the amount of dumbassery I manage to accomplish out there...well, it was time.
I plan to try it on the langmuir table when I finish putting that together and for any welding of course.
I bought through a dealer who saved me the shipping at least and said he would do the same for anyone I sent his way if anyone else is looking.

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

N2 Welding
3 Star Member
3 Star Member
Posts: 290
Joined: Sat Oct 27, 2018 2:07 pm

Re: Fume dog fume extractor.

Post by N2 Welding »

Sounds like a good buddy, if he's paying for it :p
constantproject
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Thu Dec 29, 2022 7:17 pm

Re: Fume dog fume extractor.

Post by constantproject »

hahaha I wish!! He twisted my arm into it because he wanted one too lol.
sonbakler
3 Star Member
3 Star Member
Posts: 349
Joined: Fri Apr 15, 2011 3:47 am

Re: Fume dog fume extractor.

Post by sonbakler »

I used one that almost the same except that it blew the smoke outside. It worked well but you need to keep the inlet close to the torch or smoke will escape it. I suspect with that unit it will plug the filter pretty quickly and although it will catch the particulate you are still exhausting the harmful fumes back into your shop.
Post Reply

Return to “Water Tables, Ventilation, Air Handling”