Sheet mover

All topics related to fab & weld tables, grind stations, material handling & storage, etc.
Post Reply
User avatar
SeanP
4 Star Member
4 Star Member
Posts: 951
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Sheet mover

Post by SeanP »

Just thought I would share how I move sheets around the shop, it seems to work well for me, I can move a 3mm 8'x 4' around with ease.
I cut down the base plate on the sack truck to 1'' wide and added the frame with a piece of wood across for grip.

Link to video here
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8205
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Sheet mover

Post by acourtjester »

You smarter then the average bear thanks for sharing
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
User avatar
HammerDownJustin
3.5 Star Member
3.5 Star Member
Posts: 614
Joined: Mon Mar 04, 2013 10:41 pm
Location: Paradise,Tx

Re: Sheet mover

Post by HammerDownJustin »

Nice idea for sure
Home built 5x10 table CandCNC electronics
Miller 251 Mig
And lots of other cool stuff...
User avatar
Scratch
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 836
Joined: Tue Sep 01, 2009 9:07 pm
Location: Hudson,WI
Contact:

Re: Sheet mover

Post by Scratch »

Good idea. What's the thickest you dare to move with that setup in a 4x8 sheet?
I think I'm the oldest 10 year old boy on the forum...
User avatar
SeanP
4 Star Member
4 Star Member
Posts: 951
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Re: Sheet mover

Post by SeanP »

Scratch wrote:Good idea. What's the thickest you dare to move with that setup in a 4x8 sheet?
Um probably around 5mm to be honest.
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
beefy
4.5 Star Member
4.5 Star Member
Posts: 1503
Joined: Fri Jan 18, 2013 3:19 am

Re: Sheet mover

Post by beefy »

Thanks for that Sean,

sometimes the simplest ideas are the hardest to think of. I'm useless at thinking of simple solutions.

I can't use that idea at present because I load my table end on, no access anywhere else, but that trolley idea can be applied to just about anything, good one.

Keith.
2500 x 1500 water table
Powermax 1250 & Duramax torch (because of the new $$$$ync system, will buy Thermal Dynamics next)
LinuxCNC
Sheetcam
Alibre Design 3D solid modelling
Coreldraw 2019
User avatar
SeanP
4 Star Member
4 Star Member
Posts: 951
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Re: Sheet mover

Post by SeanP »

Just thought I would add to this,,,the next step after the sack truck mod,,,,it's taken me a while to think how to do it but think it will do the trick, loaded 3 x 3mm sheets together (8' x 4') and it passed.

Video here will explain all :P

https://www.youtube.com/watch?v=ubyRYxWP4dU
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
gwt181
1.5 Star Member
1.5 Star Member
Posts: 28
Joined: Mon Feb 02, 2015 9:38 am
Location: Denham Springs, Louisiana

Re: Sheet mover

Post by gwt181 »

Very Nice
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8205
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Sheet mover

Post by acourtjester »

That deserves at least 2 thumbs up you short changed yourself in the video.
I can see then showing up in a lot of one man shops thanks
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
hanix
1 Star Member
1 Star Member
Posts: 22
Joined: Fri Sep 20, 2013 12:17 pm

Re: Sheet mover

Post by hanix »

This is absolutely great idea I haw to make something like this.
Well done. Thanks for sharing.

Thanks
Hanix
RAYZORcut
1.5 Star Member
1.5 Star Member
Posts: 35
Joined: Wed Jan 18, 2023 11:35 am
Location: Ontario,Canada

Re: Sheet mover

Post by RAYZORcut »

SeanP wrote: Sat Mar 08, 2014 2:52 pm Just thought I would share how I move sheets around the shop, it seems to work well for me, I can move a 3mm 8'x 4' around with ease.
I cut down the base plate on the sack truck to 1'' wide and added the frame with a piece of wood across for grip.

Link to video here
Hi Sean the links are not working for the 2 videos for this any chance you have the vids or maybe some pics?
Cheers!

RAYZORcut
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 10235
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Sheet mover

Post by adbuch »

I just saw this. I like the process! Thanks for posting it back when you did.
David

RAYZORcut
1.5 Star Member
1.5 Star Member
Posts: 35
Joined: Wed Jan 18, 2023 11:35 am
Location: Ontario,Canada

Re: Sheet mover

Post by RAYZORcut »

This is a great idea but my table has the gear tracks on top not on the sides, I don't think this will work with my set up. Thanks for posting the pics.

RAYZORcut
User avatar
SegoMan DeSigns
4 Star Member
4 Star Member
Posts: 992
Joined: Sat Jan 06, 2018 4:45 pm

Re: Sheet mover

Post by SegoMan DeSigns »

This is what I use until I get the new shop edition with overhead gantry done:

10K Forklift W/10' sheet

IMG_20200807_103920170.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

RAYZORcut
1.5 Star Member
1.5 Star Member
Posts: 35
Joined: Wed Jan 18, 2023 11:35 am
Location: Ontario,Canada

Re: Sheet mover

Post by RAYZORcut »

lol. When you get the new shop and over head send the fork up here.

RAYZORcut
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1689
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Sheet mover

Post by tnbndr »

This is a great idea but my table has the gear tracks on top not on the sides, I don't think this will work with my set up
I think I have posted this before but here it is again. I built this so that I could end load 4x8 sheets by myself.

Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
RAYZORcut
1.5 Star Member
1.5 Star Member
Posts: 35
Joined: Wed Jan 18, 2023 11:35 am
Location: Ontario,Canada

Re: Sheet mover

Post by RAYZORcut »

tnbndr wrote: Mon Feb 27, 2023 10:23 am
This is a great idea but my table has the gear tracks on top not on the sides, I don't think this will work with my set up
I think I have posted this before but here it is again. I built this so that I could end load 4x8 sheets by myself.

Great Idea!! Thanks for the vid!!

RAYZORcut
User avatar
Joe Jones
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3492
Joined: Sat Oct 11, 2014 2:33 pm
Location: Franklin, KY., USA
Contact:

Re: Sheet mover

Post by Joe Jones »

SegoMan DeSigns wrote: Fri Feb 24, 2023 12:49 pm This is what I use until I get the new shop edition with overhead gantry done:

10K Forklift W/10' sheet


IMG_20200807_103920170.jpg
This is exactly how I do it. I have a 3 TON Toyota forklift with 5-foot forks. I end load the sheet against the blades and use a strap to curl up the end a bit. Then lay the sheet onto the grates and release the strap. The weight of the sheet allows me to pull the blades out from beneath the sheet after that, and then I manually slide the sheet into place.

The forklift wasn't cheap, but it is the BEST tool I have added to my shop. It does ALL of the heavy lifting for me! Next Spring, I am looking at adding left-right shifting capability to the lift, along with auto hydraulic spreading of the fork blades.

Joe


.
Last edited by Joe Jones on Tue Dec 12, 2023 4:21 pm, edited 1 time in total.
PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades

X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
SwiftShape 3-in-1 machine

CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer

Bernardo Mach 55 TON Ironworker

FREE DesignEdge Training Online Via ZOOM!
RAYZORcut
1.5 Star Member
1.5 Star Member
Posts: 35
Joined: Wed Jan 18, 2023 11:35 am
Location: Ontario,Canada

Re: Sheet mover

Post by RAYZORcut »

Hi Joe, thanks for the response, the fork lift is definitely the way to go. Unfortunately I had to get a manual fork lift for now until I can get the real deal and it’s literally came in hand more times than I can say, game changer!!
B5DF04D6-D3DF-4A84-A1F0-1AF505E397B0.jpeg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

RAYZORcut
User avatar
Joe Jones
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3492
Joined: Sat Oct 11, 2014 2:33 pm
Location: Franklin, KY., USA
Contact:

Re: Sheet mover

Post by Joe Jones »

Anything that does the heavy lifting is a blessing!

Joe
PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades

X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
SwiftShape 3-in-1 machine

CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer

Bernardo Mach 55 TON Ironworker

FREE DesignEdge Training Online Via ZOOM!
RAYZORcut
1.5 Star Member
1.5 Star Member
Posts: 35
Joined: Wed Jan 18, 2023 11:35 am
Location: Ontario,Canada

Re: Sheet mover

Post by RAYZORcut »

Cheers!
RAYZORcut
Post Reply

Return to “Fab Tables, Grind Stations, Material Storage & Handling”