New Member! AJ Ness, ND

New to PlasmaSpider? Introduce yourself to the community and tell us a little about you.
Post Reply
AJNess822
1 Star Elite Contributing Member
1 Star Elite Contributing Member
Posts: 25
Joined: Tue Oct 27, 2020 1:08 pm
Location: Minot, ND

New Member! AJ Ness, ND

Post by AJNess822 »

I'm a young buck who's been welding and cutting on a plasma table my whole life. I'm running a Lincoln Accumove 3 with a hypertherm 105, and a home made 7'x20' table. Love what a lot of you guys have shared, and if someone could explain how to turn a CADLINK.CDL drawing into a DXF I'd love to share some of my work.
plasmanewbie
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2565
Joined: Thu Jul 24, 2008 11:15 am

Re: New Member! AJ Ness, ND

Post by plasmanewbie »

Welcome to the site! I am not at all familiar with a cdl files and a quick look online came up with nothing that will convert them to dxf unfortunately.
User avatar
WyoGreen
4 Star Member
4 Star Member
Posts: 897
Joined: Tue Mar 04, 2014 8:36 pm
Location: Cheyenne, Wyoming

Re: New Member! AJ Ness, ND

Post by WyoGreen »

I use Coreldraw for some of my designing & it puts out .cdl files in addition to .dxf, .svg, and many others. Perhaps CADLINK will also put out other formats other than .cdl files.

Steve
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8598
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: New Member! AJ Ness, ND

Post by adbuch »

Welcome aboard!
David
AJNess822
1 Star Elite Contributing Member
1 Star Elite Contributing Member
Posts: 25
Joined: Tue Oct 27, 2020 1:08 pm
Location: Minot, ND

Re: New Member! AJ Ness, ND

Post by AJNess822 »

WyoGreen wrote: Fri Oct 30, 2020 6:56 pm I use Coreldraw for some of my designing & it puts out .cdl files in addition to .dxf, .svg, and many others. Perhaps CADLINK will also put out other formats other than .cdl files.

Steve
Thank you, I'll dig a little deeper into this.
Bodor 12KW Laser Tabe (8'X20')
Lincoln Accumove 3
Hypertherm Powermax 1650
7'x20' Table (plasma and torch)
Mobile Welding (Miller Big 40)
Magnetic Particle and Liquid Dye Testing (Level II)
AJNess822
1 Star Elite Contributing Member
1 Star Elite Contributing Member
Posts: 25
Joined: Tue Oct 27, 2020 1:08 pm
Location: Minot, ND

Re: New Member! AJ Ness, ND

Post by AJNess822 »

I figured it out. For anyone using torchmatecad its the same as any other program but instead save as you export file into DXF or SVG.
Bodor 12KW Laser Tabe (8'X20')
Lincoln Accumove 3
Hypertherm Powermax 1650
7'x20' Table (plasma and torch)
Mobile Welding (Miller Big 40)
Magnetic Particle and Liquid Dye Testing (Level II)
Post Reply

Return to “Introduce Yourself”