New here
-
- 1/2 Star Member
- Posts: 8
- Joined: Tue May 17, 2022 2:20 pm
New here
I'm new to the CNC plasma table world have a tru cut 4-8 with a sparks robotics retro fit kit. Love the page and have learned a lot from here just wanted to say Hello and thank you.
- Scratch
- 3.5 Star Elite Contributing Member
- Posts: 806
- Joined: Tue Sep 01, 2009 9:07 pm
- Location: Hudson,WI
- Contact:
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7784
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: New here
Welcome aboard You can use the search function in the upper right for a good look around (files and projects to stir your interest and add to the fun).
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 6 Star Elite Contributing Member
- Posts: 8621
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: New here
Nice to have you! Feel free to post some photos of your setup and any projects you are working on.
David
David
-
- 4 Star Elite Contributing Member
- Posts: 1955
- Joined: Fri Apr 17, 2009 11:48 am
Re: New here
Welcome! Interesting setup, there are some others here who maybe interested in the spark retrofit kit for their trucut tables since they are no longer in business. Is it working well for you?
-
- 1/2 Star Member
- Posts: 8
- Joined: Tue May 17, 2022 2:20 pm
Re: New here
Just got it up and running good I'm in central NC and with spark robotics in Asheville NC I was able to go look at factory and talk with them. Frank Johnson the owner is very invested in his business and customer service. Good chance if you are in need of support Frank will answer the phone. The table it's self was Gary Ramsey on YouTube first table I went to Dallas to pick it up he was a big supporter of tru cut. It worked ok for a little while but if I need service or support Cindy and Ron from tru cut were anything but nice. Well let's say a relay or something in control board went out along that time tru cut went out of business or what they called a business. Long story short table set for two years and finally decided I needed to get it up and running. With Spark robotics they have been a pleasure to work with. My retro kit was 3k new computer wiring and torch holder with break away. They messed up and even sent me nev x y and z motors by accident. I'm very happy with them and the best support you could ask for.
Jonathan
Jonathan
-
- 2.5 Star Member
- Posts: 126
- Joined: Wed Jun 30, 2021 8:21 am
Re: New here
Welcome aboard, Asheville NC is a beautiful place. I've visited there many times.
Randy,
Marketing Data Specialist – Americas Region
Hypertherm Inc.
Marketing Data Specialist – Americas Region
Hypertherm Inc.