New guy

New to PlasmaSpider? Introduce yourself to the community and tell us a little about you.
Post Reply
c4metalworks
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Fri Jul 15, 2022 5:28 pm

New guy

Post by c4metalworks »

Hi, guys. I'm new here and just got my Langmuir XR set up and been playing around with it. Hoping to gain some knowledge and have fun here.

Thanks,

Jason
Rex
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 316
Joined: Sat Oct 08, 2016 12:26 pm

Re: New guy

Post by Rex »

Welcome aboard
Lots of things to get from here
plasmacam 4x8 with DHC2 with Design Edge
Hypertherm 65
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8602
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: New guy

Post by adbuch »

Welcome aboard Jason! Langmuir makes some great tables. What plasma cutter are you using? I assume that you are learning Fusion 360, and Langmuir has some great tutorials. Many here also use Inkscape, also free and easy to use. Be sure to show us some photos of your setup and projects you have been making. I would also encourage you to become a contributing member ($20/year) for access to all the free cut files as well as may other benefits.
David
HypHyDef
2.5 Star Member
2.5 Star Member
Posts: 126
Joined: Wed Jun 30, 2021 8:21 am

Re: New guy

Post by HypHyDef »

Welcome Jason. I'm sure you will find all the information you could ever need here.
Randy,
Marketing Data Specialist – Americas Region
Hypertherm Inc.
Post Reply

Return to “Introduce Yourself”