New owner of a swift cut 5x10

[Varnbilt]

Hey guys! We are new to cnc ownership previously we would design and send files to get cut. We purchased a 5x10 swift cut pro downdraft a few months back and finally got it setup. Super happy with the nesting software engraver and also the cut quality. Running hypertherm 85.

[SegoMan DeSigns]

Welcome to the plasma jungle, in house is the only way to go!

[ROKCRLER]

Welcome... nice design on the axle stands!
Looks like you work on 4WD stuff too.

[Varnbilt]

Welcome... nice design on the axle stands!
Looks like you work on 4WD stuff too.

Thanks

Yes we build quite a few trucks for the sema show every year. We also started offering some bolt on superduty stuff like the link arms in the top post. I just starting working on a frame off 86 f350 crew dually we are building a 4 link for now. We have built some wild stuff in the past just pumped I no longer have to wait 2-3 weeks to have cut parts shipped back to me now.

[acourtjester]

Welcome aboard you will pay for the table in a short time

[Jason@bc]

It looks like you are well on your way already, nice cuts, it's nice to be able to do your own stuff.

[adbuch]

Welcome Varnbilt! Very nice looking setup you have there and it appears you've really got it dialed in. Super looking cuts. I will look forward to seeing more of your projects using your new table.

David

[DieselFumes]

Nice looking setup, machine, and parts! Welcome aboard.