EASYSCRIBER QUESTIONS

All topics related specifically to the EasyScriber drag style scribe & engraving tool.
EasyScriber
Posts: 74
Joined: Thu Dec 13, 2018 2:13 pm

Re: EASYSCRIBER QUESTIONS

Post by EasyScriber » Mon Oct 21, 2019 10:05 am

Dragfluid wrote:
Sun Oct 20, 2019 3:48 pm
BTW, this will be used on a PlasmaCam DHC2, with the 3.11 software. Anything in particular to be aware of?
Nothing else, your good to go.

Just visit this link to see the settings for EasyScribing with PlasmaCam viewtopic.php?f=172&t=28846

Let us know if you have any additional questions :Like

JohnnyC
Elite Contributing Member
Elite Contributing Member
Posts: 43
Joined: Mon Feb 12, 2018 9:13 am

Re: EASYSCRIBER QUESTIONS

Post by JohnnyC » Tue Feb 25, 2020 5:56 pm

I need settings for wincnc can anyone help?

EasyScriber
Posts: 74
Joined: Thu Dec 13, 2018 2:13 pm

Re: EASYSCRIBER QUESTIONS

Post by EasyScriber » Wed Feb 26, 2020 4:28 pm

JohnnyC wrote:
Tue Feb 25, 2020 5:56 pm
I need settings for wincnc can anyone help?
Have not had the opportunity to run one using WinCNC. What problems are you seeing?

JohnnyC
Elite Contributing Member
Elite Contributing Member
Posts: 43
Joined: Mon Feb 12, 2018 9:13 am

Re: EASYSCRIBER QUESTIONS

Post by JohnnyC » Fri Feb 28, 2020 2:19 pm

I talked to my table rep and he got it working. You may want to get a copy of WinCNC so you can give instructions

EasyScriber
Posts: 74
Joined: Thu Dec 13, 2018 2:13 pm

Re: EASYSCRIBER QUESTIONS

Post by EasyScriber » Mon Mar 02, 2020 11:45 am

JohnnyC wrote:
Fri Feb 28, 2020 2:19 pm
I talked to my table rep and he got it working. You may want to get a copy of WinCNC so you can give instructions
That was our first move since there is a demo of WinCNC available however without the hardware on the other end to actually test we could not confirm anything. Very interested in what you learned and how its working for you.
Last edited by EasyScriber on Wed Mar 04, 2020 12:24 pm, edited 1 time in total.

JohnnyC
Elite Contributing Member
Elite Contributing Member
Posts: 43
Joined: Mon Feb 12, 2018 9:13 am

Re: EASYSCRIBER QUESTIONS

Post by JohnnyC » Wed Mar 04, 2020 12:18 pm

Have to go into WinCNC every time and change all instances of 2 lines of code. It works alright so far

Post Reply

Return to “EasyScriber Drag Style Scriber for Hypertherm”

Industry Pros use FastCut CNC