EasyScriber For Flashcut Software

All topics related specifically to the EasyScriber drag style scribe & engraving tool.
Post Reply
claudio
1 Star Elite Contributing Member
1 Star Elite Contributing Member
Posts: 5
Joined: Fri Jul 28, 2017 8:50 am

EasyScriber For Flashcut Software

Post by claudio »

Hey everyone,

I did a search for easyscriber for flashcut cnc and couldn't find any info , so through trial and error ( tons of error ) I finally figured out how to use it.

I have attached some photos of the setup and and will type some info as well.

Step 1 is to open up flash cut ( I use Silver cut from machitech ) and go to configuration ( top right , 2 gears beside key )

Step 2 On the left hand side, click Fabrication heads

Step 3 New Fab Head

Step 4 Enter same as screen shots

Hope it works , let me know if it helped
Screenshot (1).png
Screenshot (2).png
Screenshot (3).png
User avatar
EasyScriber
2.5 Star Member
2.5 Star Member
Posts: 162
Joined: Thu Dec 13, 2018 2:13 pm
Contact:

Re: EasyScriber For Flashcut Software

Post by EasyScriber »

Thanks for posting your setup. Flashcut is not one that we have worked personally with and your setup is appreciated. Glad you have it set up and working, please keep us posted on your success with this.
Post Reply

Return to “EasyScriber Drag Style Scriber for Hypertherm”