Using EasyScriber with Pcam 3.11

[abmetal]

Just wondering if anybody would have the settings for using the EasyScriber with Plasmacam 3.11 that they'd share.

Thanks.
Allen

[EasyScriber]

Hi Allen

See if the image below helps you out.

[abmetal]

Thanks, I'll try it.

Allen

[rdj357]

All of those Design Edge settings are available in 3.11 even if they are not in the same places on the screen.

Let me know here if you have any trouble and i'll open 3.11 and take some screenshots specific for it.

[abmetal]

Wifey has Design Edge on the PC in the office but she WON'T put it on the one in the shop, and we don't wanna get into that. But we never could seem to get the settings right so she just gave up. But we've quit doing production work and now have the time to mess with it and I'd really like to see it dialed in. When the weather cools down a little, we're going to try it again. 99 degrees with 70% humidity is just too much for this old body.

Thanks.
Allen

[EasyScriber]

Thanks Robert, appreciate you coming up with these settings for us and continuing to help