0-22 Error on Powermax 65

Discussion on 0-30 fault codes
Post Reply
User avatar
ColoradoWayne
2.5 Star Member
2.5 Star Member
Posts: 249
Joined: Fri Dec 06, 2013 4:48 pm
Location: Colorado Springs, CO

0-22 Error on Powermax 65

Post by ColoradoWayne »

We have had our Hypertherm Powermax 65 since we started cutting steel almost 9 years ago. It has worked nearly flawlessly in all that time, even though it has been pushed pretty hard from time to time. It came to a dead stop recently. Showing a 0-22 error which I could find very little information on, rather than turn on the gas. Luckily the fine people at Hypertherm quickly and easily diagnosed the problem, provided a work around and gave me the part number I needed to order. It was a simple air pressure switch gone bad. The switch is now replaced along with a new air filter. Just want to give accolades to the folks at Hypertherm for their help and direction. Salute!
20221011_090529[1].jpg
20221011_084714[1].jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Wayne
LDR Motion Systems 4 x 4 water table
Hypertherm Powermax 65
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: 0-22 Error on PMX 65

Post by acourtjester »

Good feedback thanks.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1928
Joined: Fri Apr 17, 2009 11:48 am

Re: 0-22 Error on PMX 65

Post by weldguy »

That's great, thanks for the info :Like :Like
Bern
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Fri Jul 28, 2023 9:02 am

Re: 0-22 Error on Powermax 65

Post by Bern »

Hi Wayne

I have the same problem now . Can I just bridge the pressure switch for a quik fix until I get a new switch.

Thanks Bernard
Post Reply

Return to “0-22 Fault Code”