4 x 8 Plasma Table build

For general topics and questions that do not fit into any of the other categories or forums.
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: 4 x 8 Plasma Table build

Post by acourtjester »

Here are two 3-D printed torch holders I have developed and used, the floating head I gave to another guy building a table. The magnetic also has a floating head switch incorporated in it. I can give you the files if you want.
viewtopic.php?f=122&t=32753
https://plasmaspider.com/viewtopic.php?f=122&t=32623
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8602
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: 4 x 8 Plasma Table build

Post by adbuch »

acourtjester wrote: Thu Apr 27, 2023 5:16 pm Here are two 3-D printed torch holders I have developed and used, the floating head I gave to another guy building a table. The magnetic also has a floating head switch incorporated in it. I can give you the files if you want.
viewtopic.php?f=122&t=32753
https://plasmaspider.com/viewtopic.php?f=122&t=32623
Thanks for sharing these Tom! It would be nice if this forum had some sort of organized area set aside specifically for 3D Printed Parts files and designs. Something different that the 3D Printers section of the forum. Or perhaps a subset heading in that category.

David
mcmental
2.5 Star Member
2.5 Star Member
Posts: 133
Joined: Thu May 14, 2020 10:06 am

Re: 4 x 8 Plasma Table build

Post by mcmental »

acourtjester wrote: Thu Apr 27, 2023 5:16 pm Here are two 3-D printed torch holders I have developed and used, the floating head I gave to another guy building a table. The magnetic also has a floating head switch incorporated in it. I can give you the files if you want.
viewtopic.php?f=122&t=32753
https://plasmaspider.com/viewtopic.php?f=122&t=32623
Tom that would be great to grab those files please and any photos of your support too.
Thank you
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8602
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: 4 x 8 Plasma Table build

Post by adbuch »

mcmental wrote: Fri Apr 28, 2023 1:54 am
acourtjester wrote: Thu Apr 27, 2023 5:16 pm Here are two 3-D printed torch holders I have developed and used, the floating head I gave to another guy building a table. The magnetic also has a floating head switch incorporated in it. I can give you the files if you want.
viewtopic.php?f=122&t=32753
https://plasmaspider.com/viewtopic.php?f=122&t=32623
Tom that would be great to grab those files please and any photos of your support too.
Thank you
It would also be nice if this forum allowed stl files to be uploaded to share. But I think if you PM Tom he will email you the files.
David
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: 4 x 8 Plasma Table build

Post by acourtjester »

PM sent to mcmental about the files.
Admin is just aware of the trolls out there wanting to do bad, and the file format they use.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
mcmental
2.5 Star Member
2.5 Star Member
Posts: 133
Joined: Thu May 14, 2020 10:06 am

Re: 4 x 8 Plasma Table build

Post by mcmental »

Thank you
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8602
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: 4 x 8 Plasma Table build

Post by adbuch »

acourtjester wrote: Fri Apr 28, 2023 8:53 am PM sent to mcmental about the files.
Admin is just aware of the trolls out there wanting to do bad, and the file format they use.
:Like :Like :Like
User avatar
admin
Site Admin
Posts: 370
Joined: Thu Jul 03, 2008 5:12 pm
Location: Out In The Shop
Contact:

Re: 4 x 8 Plasma Table build

Post by admin »

adbuch wrote: Fri Apr 28, 2023 2:13 am
mcmental wrote: Fri Apr 28, 2023 1:54 am
acourtjester wrote: Thu Apr 27, 2023 5:16 pm Here are two 3-D printed torch holders I have developed and used, the floating head I gave to another guy building a table. The magnetic also has a floating head switch incorporated in it. I can give you the files if you want.
viewtopic.php?f=122&t=32753
https://plasmaspider.com/viewtopic.php?f=122&t=32623
Tom that would be great to grab those files please and any photos of your support too.
Thank you
It would also be nice if this forum allowed stl files to be uploaded to share. But I think if you PM Tom he will email you the files.
David
Stl file format upload capability was added a few months ago. Is anyone having an issue with uploading stl files?
TJS
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 707
Joined: Wed Nov 26, 2014 1:22 pm
Location: Fairfield, CT.
Contact:

Re: 4 x 8 Plasma Table build

Post by TJS »

To the admin. Not sure why my pics are not showing up. I have to contact my web hosting company.
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: 4 x 8 Plasma Table build

Post by acourtjester »

Test file 3 inch knob file looks OK
3 inch knob with oval holes.stl
3 inch YES.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8602
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: 4 x 8 Plasma Table build

Post by adbuch »

admin wrote: Fri Apr 28, 2023 3:58 pm
adbuch wrote: Fri Apr 28, 2023 2:13 am
mcmental wrote: Fri Apr 28, 2023 1:54 am

Tom that would be great to grab those files please and any photos of your support too.
Thank you
It would also be nice if this forum allowed stl files to be uploaded to share. But I think if you PM Tom he will email you the files.
David
Stl file format upload capability was added a few months ago. Is anyone having an issue with uploading stl files?
Thanks Jason! I had not tried it lately, but was just remembering from back when had I previously tried to do it. Thanks for the update.
David
User avatar
admin
Site Admin
Posts: 370
Joined: Thu Jul 03, 2008 5:12 pm
Location: Out In The Shop
Contact:

Re: 4 x 8 Plasma Table build

Post by admin »

TJS wrote: Fri Apr 28, 2023 4:21 pm To the admin. Not sure why my pics are not showing up. I have to contact my web hosting company.
No sweat. We’ve located your pics, we’re hosting them on our server, and your posts look 100% good again 👍
TJS
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 707
Joined: Wed Nov 26, 2014 1:22 pm
Location: Fairfield, CT.
Contact:

Re: 4 x 8 Plasma Table build

Post by TJS »

Thanks. The company that hosts my website is blaming it on Register dot com and Register dot com states it is not them. Round and roundy.
User avatar
admin
Site Admin
Posts: 370
Joined: Thu Jul 03, 2008 5:12 pm
Location: Out In The Shop
Contact:

Re: 4 x 8 Plasma Table build

Post by admin »

TJS wrote: Mon May 01, 2023 6:53 am Thanks. The company that hosts my website is blaming it on Register dot com and Register dot com states it is not them. Round and roundy.
No problem. It's not your domain registration company, it's your web host. Likely their software picked up on these images loading a lot when this thread became active again and they cut you off. That's a bad host.
Post Reply

Return to “CNC Plasma Cutters General Forum”