Water Table

For general topics and questions that do not fit into any of the other categories or forums.
Post Reply
GEORGE HAMILTON
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Mon Mar 14, 2016 3:50 pm

Water Table

Post by GEORGE HAMILTON »

Water table starting to have pin hole leaks. What has been used or done to repair. Or do I just need to build new pan.
User avatar
Scratch
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 807
Joined: Tue Sep 01, 2009 9:07 pm
Location: Hudson,WI
Contact:

Re: Water Table

Post by Scratch »

Can't you drain it and weld the pin holes? Or are there too many?
I think I'm the oldest 10 year old boy on the forum...
Paint Chip
2.5 Star Member
2.5 Star Member
Posts: 108
Joined: Tue Oct 30, 2012 7:43 pm

Re: Water Table

Post by Paint Chip »

I've used PC-11 marine epoxy with good success. Spread it with a 4 in drywall taping knife. The repair I did a year ago is still leak free.
PPLLC 4X8 table w 620 ox steppers on 5 axes
Bladerunner CandCNC w/DTHC II
Hypertherm PM85
Post Reply

Return to “CNC Plasma Cutters General Forum”